wdfiller

MrPLC Member
  • Content count

    1
  • Joined

  • Last visited

Everything posted by wdfiller

  1. I hate to start a new topic on such an old processor but I forced to keep this thing working until I can upgrade it.  We are having funny issues with outputs.  At first they were on a PLC5/60.  We suspected a bad processor so we changed to a PLC5/40 we had in our tool crib and the problem didn't go away.  Some of our outputs in the ladder are being evaluated to true but not turning on.  We can force the output on and it will come on and when we remove the force it will turn back off.  I've never seen this problem before on any processor.  All the logic leading up to the output is true but the output is not turning on and is there not green. I've already checked all the obvious causes.  The instruction is an OTE.  The output is not duplicated somewhere else in the logic that is turning it off.  The ladder file is being scanned.  I replaced the output with a B3 bit and on the next line had the B3 bit turn on the ouput.  The B3 output bit turned on but the output did not.  This output is on a remote I/O rack and other outputs on that rack are working. Any ideas would be greatly appreciated.