Sergio Bortolucci

               Hello.                Please, I need help because I am facing problems                On display in the HMI (Quick Panel 12+ 12 "TFT Capacitive (IC755CSS12CDB) analog values in the LReal format.                I implemented all the screens I developed and tested in "simulator" mode, and in this mode the analog variables in the LReal format work.                However, when I establish communication between the HMI and the RX3i PLC (SRTP Driver) and try to read or write some variable in both directions (PLC> HMI or IHM> PLC), the LREAL type variables do not work,                Are read as whole.                I've tried the following alternatives:                                - Switch the SRTP to TCPIP communication driver.                                - "Forced" import of the variable in the Real format. (In this case the variable up to the Real format, but continues with the same behavior when configured in LReal).                                - Use of the basic Text tool instead of the Interactive Numeric Data Entry tool.                                - Change the Data Type to Integer.                                - Changing the Default Display Format from General format to Floating point.                                - Use of Engineering Units.                None of these options worked. I just have not updated the HMI firmware yet. I am currently using Windows CE System Version 7.00 (Build 2824) and would like to upgrade Firmware only if there are no other alternatives to be adopted.                Thank you.