ta2mix

I have a new question. When I run gx works2 v1.98 c F1  help  For example, pressing the F1 button while on TON-1 opens the page about the TON time relay. Now the general help book is opening how can i fix this  

Icoudnt understand Easybuilder pro weintek HMI program software  

In my system, MT8150XE and Allen bradley compactlogix communicate with PLC ethernet. When I compile the project I made with Easybuilder pro v5.01.04 and upload it to the screen with v6.05.01.565, it does not communicate at all and I get a no response error. only difference between the two projects Previously Driver V.1.50, ALLEN_BRADLEY_EIP_COMPACTLOGIX.e30 In the new one, the Driver says "Device ID: 156, v.1.80, as. ALLEN_BRADLEY_EIP_COMPACTLOGIX.e30" Copying the ALLEN_BRADLEY_EIP_COMPACTLOGIX DLL file from the old version driver folder to the new version folder, it rarely gets online. Is there a solution? Thank you from now

Thank you very much for helping me wasan    first image normaly . because ethernet connection fault but secont image not notmaly  my system shows 0 when my system is running normally this is my problem  

I finished my project with citect 2016. 4 x fx3u connected with Ethernet. It shows n / a when the Ethernet connection is disconnected, this is normal. but my trends sometimes show zero for 3 or 5 seconds. how do I prevent it. I couldn't find a solution.    

I don't know how to share settings. I'm waiting for you to send pictures

Hi Wasan I used process analyst and trend tag ( this is work from hdd archive) I made  two project with wincc and citect ( two pc server). when the problem, Wincc project stably and good work but citect process analyst 2 or 4 times a day at different times recording zero value.