KCRP

Hi, I am using IQ-R Series "R16ENCPU" With Inbuild CC-LINK IE FIELD "RJ71EN71" and attached CC-LINK "RJ61BT11". Problem is, Even though my remote IO cards are in Online connected with masters, I cannot able to On/OFF Remote Device station IOs in CC-Link IE FIELD network. But CC-Link Normal is working fine. Refresh settings and Network Config Settings are done, Below attached the pics for reference. I cannot able to find the problem, Can anyone help me in this.  

See below Pic for the Communication in between the remote devices.

Initially i configured Refresh setting for CC LINK IE FIELD is X2000 & Y2000 also cannot get signal  

Hi @Gambit ,Thanks for a reply. Actually my refresh settings is X2000 AND Y2000 and I tried with X2000 and Y2000 i never get a ON/OFF signal. Then i change to X200 and Tried also no signal.

Hi, I want to download the USB Driver Software for the Mitsubishi FX3GE-40M PLC, Can anyone help me where to download this driver software.

Thankyou So Much @sparky

HAI Everyone, I have doubt regarding the selection of Inverter(VFD) for the Blower. Actually i bought 13kW 380V 50Hz blower along with Mitsubish Inverter FR-F740-15K.(15kW inverter). Now i changed to new Blower with low capacity of 5.5kW 380V 50Hz, but i never changed the Inverter to lower capacity. Now what is my doubt is whether i can use the same inverter or i need to change?

Thanks for your reply @sparky, What are all the parameters must to change?

Hi, I am doing a project with three Omron Cj2m cpu.  I dont know how to connect More than one Omron Cj2m Cpu Plc in a same network to communicate each other with a Internal Memory addresses. Can any one help me to understand?

Hi i am new to Mitsubishi servo drives, i want to know how to Tune the Mitsubishi (MR-JE-A-200w) servo drive Can any one guide me please  

How to do with network configurator

Hai, I am doing program for Mitsubishi FX3U Series PLC i don't know some options in that can any one help me to sort out this. 1) I assigned the Address Y040 for one output, suppose during the machine running this output is in ON condition, if the plc power went Off and On again, the output should be in the same previous state. can we do this? How?  2) If i switch OFF the PLC power and Switch ON again i want to switch ON one Input Contact, only for the first time. What is that one scan ON input Address? Please reply fast if you know..

Thank you..so much sir for your valuable reply. This website is very useful. i like it. i am just a beginner for this PLC field please help me if i ask some questions.Thanks.

Hai, I am doing program for Mitsubishi FX3U Series PLC i don't know some options in that can any one help me to sort out this. 1) I assigned the Address Y040 for one output, suppose during the machine running this output is in ON condition, if the plc power went Off and On again, the output should be in the same previous state. can we do this? How?  2) If i switch OFF the PLC power and Switch ON again i want to switch ON one Input Contact, only for the first time. What is that one scan ON input Address? Please reply fast if you know..

Thank you..so much for your reply. This website is very useful. i like it. i am just a beginner for this PLC field please help me if i ask some questions.Thanks.

Hai,  i want to know the connections for the Stepper Motor with STR2 Driver to Omron NX Pulse output unit PG0122. Can anyone suggest me how?

Hai i want to know how to save and retain the values of the program even in Emergency power off the PLC and on again? can any one help me?

Thanks  

Hai, what is the one scan ON contact address during switching ON for Mitsubishi FX3U Series.

Thankyou so much  Gambit.  

Sorry i am new to this field. can you please tell me how to use that in program? I am using Mitsubishi FX3U Series of plc.