mr_lee

I'm new to programming were putting a old 503 plc we got on a press it has boxes running on belts. Would like to put a photo eye to count the boxes and some how turn that into boxes per minute on a panel view. Any help would be appreciated thanks.

Hello We have a machine with a ge fanuc series 5  ic655cpu500j it has a bus controller with multiple modules. first it wouldn't go into run mode so we sent it to the company the machine come from. they sent it back said it was ok we tried it again the cpu red light was on and the I/O amber light was on this time. so we sent rack and all back they said the cpu was bad sent it back with another cpu well the run light came on but the I/O light was on but when we powered it down and turned it back on the diag the mem and the I/O light was on and no run. on the bus controller bd ok light is green and the comm ok light too but  none of the modules have the I/O enabled light on. we have a old dos computer but we haven't had any luck finding the logicmaster 5 software any ideas would be appreciated thanks.