Jhona Daniel
MrPLC Member-
Content count
22 -
Joined
-
Last visited
Everything posted by Jhona Daniel
-
Hello to everybody! This time I need to make a program to control temperature ... Some help? I don't know how to use an analog module, I'm just starting to working with them. The PLC I have a FX3u-32MR/ES (Mitsubishi), and I have the modules; FX3u-4AD-ADP and FX3u-4AD-PT-ADP for temperature measurement. PLEASE HELP? Have a good day!
-
Hello everyone! Could someone help me and tell me what the "D212" means? I know that to define the time of a TIMER you must put a k and number (miliseg). Help.... :(
-
Hello everyone! Could someone help me and explain me this block of a ladder diagram I'm working with? I do understand the M800 is always ON contact, for the PLC to not lose the values. Also I know that the DIV is a division, the FLT is a integer to floating point (thing I don't understand), the DEMUL is a floating point multiplication (thing I also don't understand), the INT is a floating point to 16-bit integer, and the MOV is for moving a value from a data register to an other data register. Help... :(
-
Thank you @Crossbow
-
HELLO TO EVERONE!!Could someone please help me find a special relay command (not a real relay) that stays activated when it receives a pulse from a NO contact (X0), and desactivies when it receives a second pulse from the same NO contact (X0)? So en conclusion I need to control a relay with only button.I hope you understand me... Help please....
-
Hello to everybody! I have same trouble with the simulation, I CAN'T SIMULATE :( The botton for simulation is not active, the PLC I'm using is a FX3U Mitsubishi. Any recommendation?
-
For real? I WILL CHECK IT OUT! But if you could help me with the link, that would be great ! Thanks for recommendation!!!!
-
No it's not a Mitsubishi cable, but I already did some experiment and it works great! THANKS FOR HELP TO ALL OF YOU!!! :D
-
Hello to everybody, can someone help me find the DRIVER for a FX-USB-AW cable, it's for a Mitsubishi PLC FX3u Help please... and thanks! :)
-
Hello everybody. My FX3u PLC doesn't turn ON, I connect to 24Vdc and nothing, not even the POWER led :( Any recommendation??????????? PLEASE
-
@kaare_t is this correct when you turn ON the PLC?... (Just the POWER led?) Jhona
-
Thanks for the help @kaare_t, I found that the input voltaje is 120Vac and I think it is working correctly Even so...
-
I install everthing from the CD, all. Could give the link? To try with that? Jhona
-
I install a driver from plccable.com, I hope it works correcly with the PLC Thanks for the help @kaare_t !!! Jhona
-
keere_t could you help me with a new problem... I connect ny PLC FX3U with 24Vdc and it doesn't turn on. Not even the led of POWER... NOTHING :( I connect the wires where there are should to be... Helpppp Jhona
-
GX Developer and I'm using a FX3U PLC, and yes I already intall it.
-
Thank you for the info, but I already tried whit the driver in C:\Program Files\MELSEC\Easysocket\USBDrivers and Windows tells me that there isn't any driver in that carpet, any recommendation???? PD. I also tried with the diver a this video...https://www.youtube.com/watch?v=ZDHhor6tHuU
-
Thanks for the example kaare_t!!! But I have an other question... Why do you put a M0? Could I use a X0 instead of the M0?
-
Thanks for info guys! I have a FX3U Mitsubishi PLC. I think that the command hay need is "ALT", could you give me an example with this command?... Pleaseeeee :)
-
HELLO TO EVERONE!!Could someone please help me find a special relay command (not a real relay) that stays activated when it receives a pulse from a NO contact (X0), and desactivies when it receives a second pulse from the same NO contact (X0)?I hope you understand me... Help please....