shltan

Hi, can anyone advise me on this. Currently my application on site is running rsview32 v7.2 (CPR 7) runtime. If I'm editing the project file using rsview32 works v7.5(cpr 9), please advise if i will have issues when opening/ running the project on the pc running the rsview32 v7.2, is it downward compatible? when opening the project using v7.5, no conversion dialog box was asked. Thank you

Dear all, Please advise has anyone used before the CJ1W-ETN21 unit to perform socket services (tcp/ip) .I've been experiencing errors like unable to open port/ recieve/ send error. The server and the etn unit is using port 9600. using socket numbers 1 and 2. Thank you,

Hi all, can anyone kindly help me in setting up gsm modem communications between the plc and pc, e.g. to go online with the cx-programmer. I'm unable to establish communications even by following the guide found in this forum Thank you.

Hi, can anyone advice me on line printing thru CX-Supervisor? I'm using a dot matrix printer, but the printer prints each line on one single page. Has anyone done something similar. Thank you.

Hi, Can anyone kindly advice me whether its possible to connect cj series plc from pc via rs485, as i'm using the cj1w-scu41, set to rs485, I can't find a suitable communications setting for my rs422.485 port. Am i right to say that hostlink only supports rs422? Thank you

Hi everybody, I am currently doing data logging into the CF card thru the CJ1M cpu13, and have not been able to display my floating point data when i open the csv data logged file, its alwys in hex format, pls kindly advise. Thank you.