Tijana
MrPLC Member-
Content count
4 -
Joined
-
Last visited
Posts posted by Tijana
-
-
I was connected via USB, because I thought that was maybe the safer connection, but apparently my logic was very wrong
This is the line from the ControlFLASH log file that showed the error:
[FAILURE] Reset: Error #11003: Unconnected Send timed out waiting for a response.
GS=0x01, ES=0x0204
So, I guess that you are completely right.I am pretty new at the whole PLC thing, so this is the first time I actually heard of "bricking", and I thank you very much for your reply and a lesson.
I haven't contacted the Tech support yet, I wanted to try everything I could before I do that, but I guess I have no other choice left.
Thank you again, very very much!
-
Hello everyone!
This is the first time I use Micro850 controller (2080-LC50-48QWB) and after I made a really simple programme (just for testing) I wanted to download it to my controller (which I was able to see and connect to via Ethernet and USB normally) and I got a message saying that firmware version didn't match (programme - v9, and PLC - v4).
So I found some datasheet where was explained how to upgrade device firmware with ControlFLASH. I started the mentioned software, choose the right controller, and I choose the version 9 and the process started, but near the end I got the ERROR message, and the update wasn't finished successfully. So my controller went to fault (FAULT red light flashes) and now I can not see it in RSLinx nor via Ethernet nor USB.
Does anyone have any idea what could I do to try to establish connection with my controller? I have tried to change from prog mode to run, and back to prog, but the fault remains.
I really hope that I didn't make some serious mistake, because we need this PLC very soon for work.
Thanks in advance!
-
Hello everyone!
I am new to Eplan, and I am working on a big project on which someone else has worked on before me and almost finished it, but with a lot of technical mistakes and missing peaces.
My boss expects me to fix a lot of things, but I have no experience with this software, so I could use some help.
The problem is that no revision information (revision date, description, approved by etc) is displayed in this project, and I don't know how to make it appear, and be correct.
I have made changes in plot frame and added special texts which should display these data, but I don't know where should I define wanted information (for example, I put special text for "approved by" but I can't seem to find adequate place to write the name of that person)? And, is there a way for Eplan to generate automatically revision description, based on the changes I made?
From all said, it is obvious that I have no idea at all how revisions work, so any help would be enormously appreciated
Thank you in advance!
Cheers
Eplan Symbol overview
in Control Panel Building
Posted
Hi everyone!
I am working on a project for the US market, but the request we had from our customer was that the symbols remain according to IEC, and not NFPA, and that I generate a Symbol overview which contains the used symbols in project. I know how to generate symbol overview with the used symbols, but the problem is that they want that aside to IEC symbol stands the corresponding NFPA symbol, and I have no idea how to do that. I attached an example of the thing that I have to generate.
Does anyone have an idea how to do that?
Thanks in advance