hi all, if The exportable code (machine code) loaded in plc, can i uplaod this cod? & load in another plc
{Process for
loading
Loading the PLC can take place in two parts:
1. The exportable code (machine code) is always loaded onto the PLC.
2. The complete compressed user program is loaded onto the PLC
Note: The user program, consisting of user defined EFBs, DFBs, derived data
types and the program (variables, sections, etc.), is only loaded onto the PLC if in
dialog Options for generating codes (Project → Options for generating
codes...) check box contain IEC selection information was activated
beforehand. The option to also load the comments contained in the check box onto
the PLC, thereby making them available as selection information, is available, as
well.
During selection the entire user program can be transferred from the empty project
to the programming device.}