deuslupos

hey, I was wondering weather is was possible to put multiple adresses in a single set/reset function.    for example:  W0.00----------------------------------------set W0.01 W0.02   as in: when W0.00 gets positive, both W0.01 and W0.02 will move to SET with only one plc instruction block     Thanks in advance.    Deuslupos

Hey,    a couple of days ago it worked just fine, they reacted to each other like they were supposed to. but after I uploaded the exact same file (but with 1 extra word button) they don't seem to see each other anymore, I've checked the IP adresses and hardware connections but everything is fine....     whenever I click something on the HMI I keep getting an error which says '' time-out error occurs while downloading by the following case: -disconnection from the cable  -Stopped host -Incorrect time-out period                allocating host: host3   does anyone here have a solution or any tips for me?   kind regards,  Deuslupos

alright, thank you:) I'll give it a shot  

can I just use a normal USB m/m cable to do that or will I need a special one?  

Michael, any way you could help me out with this different issue? for some reason I can't even transfer to my HMI trough my RS232 cable anymore..... something went terribly wrong :(

haha, that was what I ment with my post, I just re-read it, and I formulated it a bit too vague, I'm sorry for that. 

oh great! this fixed my connectivity problems. but I still can't control the PLC with the HMI screen

oh wait, the one over there hasn't been touched by me, I've been editing this from a file the last intern here made. 

I did that on purpose because the other ones didn't work. (I had contact with the omron helpdesk when I just started using the plc. and this is what they reccomanded. but I'll try the one you set up. thank you:) should the node adress here be the node adress of the HMI screen or the PLC node?  

the one I added last is the big blue one in the control screen. I was trying to figure out how to use the button. 

I uploaded the whole folder as you asked. I hope you find something:) thank you for taking the time! IO test.zip

thank you Michael^^ this'll help!  

hey!  I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem.  I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use.    I hope you can answer my following questions.    1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial?   this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL)   thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull.    kind regards,    Deuslupos,