ashraf
MrPLC Member-
Content count
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by ashraf
-
Hey all I need away to transfer program protected from cpu cj1m to another one I don't need to know the program Any one can help
-
Ok , I will try this thanks
-
Yes, it will be good for HMI work as display
-
Hello , every one This thumbwheel has 10×3 input in my plc Ones, tens and hundreds It breaks down continuously I want to replace it to three 7 segment Any one can help
-
I thought about this but hmi available for me WEINTEK I will try it
-
Thanks a lot
-
Hello , every one Can I take pulse signal from proximity sensor converting it to continuous signal While pulse come contious signal exsit when no pulse signal come contious signal disappear In omron plc
-
https://pasteboard.co/Kzmb4Nee3qeP.jpg Thanks @BobLfoot 2 lines every line 7 convoyers and 2 vibrators
-
Any ideas To make program which every silo can works with all 4 hopper through 8 convoyer system
-
@BobLfoot Yes, the sequence is actually right but , the product in silos not the same So,I want to choose the silo and hopper and line also then, when min level need to feed System works as,I chosen before
-
Every silo has two gates because,there are two lines each line 8 convoyer go in one direction only . Each hopper has two level (max,min) It should min level of any hopper operate one line to feed from any silo I can detect hopper to operate from one silo or two When two or three min level hopper need to feed which one first,how can I make priority I need first come first feed @BE Yes, exactly what I want to do but,I need also to detect the line 1 can work with all hoppers And line 2 also with all hoppers and all silos Because,the product in all silos is not the same I tried to share layout but, some thing wrong
-
Every silo has two gates because,there are two lines each line 8 convoyer go in one direction only . Each hopper has two level (max,min) It should min level of any hopper operate one line to feed from any silo I can detect hopper to operate from one silo or two When two or three min level hopper need to feed which one first,how can I make priority I need first come first feed
-
How can I detect inputs and outputs on plc program with electrical wiring digram
-
Hello everyone Can any one help how to Download Program From memory Cassette step by step showing position of switches before and after downloading Appreciate your help every one
-
CQM1H-CPU51
-
Please I want some programs to do As traffic light for example
-
Which cable is useful ?
-
I want to replace my old CQM1H-CPU51 WITH NEW ONE SUCH CJ1M It possible or it will be errors
-
Sorry,I didn't mean any thing wrong I want some help for my program Thanks for your advice about CJ2
-
I want to replace my old CQM1H-CPU51 WITH NEW ONE SUCH CJ1M It possible or it will be errors
-
Ok Can you show me every step to modify the program please B&T_KILN_ENTRY_996-C__CPU21.cxp B&T_KILN_ENTRY_996-C__CPU21.opt B&T_KILN_ENTRY_996-C__CPU51.bak B&T_KILN_ENTRY_996-C__CPU51.cxp B&T_KILN_ENTRY_996-C__CPU51.opt
-
I want to change CQM1H to CJ1M it works or not and how to change high speed Counter from CQM1H to CJ1M Yes I have Cx
-
can any one help me ? how can i use wireless signals from moving machine to fixed omron plc on the ground ?
-
hi every one i want to drive 3 seven segment with omron plc every segment by push button to up and using for output of plc of decoding 1 , 2 , 4 and 8
-
hi all, excuse me for many questions i ask i want to write number from 0 to 999 into screen and convert it to BCD to use it for input to omron plc