ashraf

Ok , I will try this thanks

Hey all I need away to transfer program  protected from cpu cj1m to another one I don't need to know the program  Any one can help

Yes, it will be good for HMI work as display 

I thought about this but hmi available for me WEINTEK   I will try it 

Hello , every one  This thumbwheel has 10×3 input in my plc  Ones, tens and hundreds  It breaks down continuously  I want to replace it to three 7 segment Any one can help 

Thanks  a lot 

Hello , every one  Can I take pulse signal from proximity sensor converting it to continuous signal  While pulse come contious signal exsit when no pulse signal come contious signal disappear  In omron plc 

https://pasteboard.co/Kzmb4Nee3qeP.jpg Thanks @BobLfoot 2 lines every line 7 convoyers and 2 vibrators  

@BobLfoot Yes, the sequence is actually right but , the product in silos not the same  So,I want to choose the  silo and hopper and line also then, when min level need to feed  System works as,I chosen before

Every silo has two gates because,there are two lines each line 8 convoyer go in one direction only . Each hopper has two level (max,min) It should min level of any hopper operate one line to feed from any silo  I can detect hopper to operate from one silo or two  When two or three min level hopper need to feed which one first,how can I make priority  I need first come first feed  @BE Yes, exactly what I want to do but,I need also to detect  the line 1 can work with all hoppers  And line 2 also with all hoppers and all silos Because,the product in all silos  is not the same  I tried to share layout but, some thing wrong

Every silo has two gates because,there are two lines each line 8 convoyer go in one direction only . Each hopper has two level (max,min) It should min level of any hopper operate one line to feed from any silo  I can detect hopper to operate from one silo or two  When two or three min level hopper need to feed which one first,how can I make priority  I need first come first feed   

Any ideas  To make program which every silo can works with all 4  hopper through  8 convoyer system 

How can I detect inputs and outputs on plc program with electrical wiring digram

CQM1H-CPU51  

Hello everyone Can any one help how to Download Program From memory Cassette step by step showing position of switches before and after downloading  Appreciate your help every one