Maqsood
MrPLC Member-
Content count
28 -
Joined
-
Last visited
Posts posted by Maqsood
-
-
Is their any method like virtual port adding to advanced HMI and cx programmer to view input and output from advanced HMI to Cx-programmer.?
-
Dear All
Could you people help me to solve this issue. I need a Function in cx-supervisor with Push Button.I want Bit ON, when I pressed the button, and when I release the button then this bit goes OFF.
Sorry for my bad English its not my native language.
-
Please help me to find out this plc circuit diagam with full component detail
-
Thank you very much for your support. it is really very helpfull.
-
Dear all Please identify me i am having one Issue in my PLC.When I changed the IP of my plc then suddenly its showing error ERH its mean IP address wrong but My CPU setting is same like previous means unit no=0, x16^0=0 ,Node=x16^0=1 and IP is 192.168.0.15 Mask add.255.255.255.0. but when I, transfer to PLC (in Program Mode) its not transferred(Failed to Transfer) please rectify me where I am doing wrong.
-
Dear all I am new please help me to find out how i can do electrical connection plus control of softstarter ATS48C48Q Schneider brand.I am using this softstarter for 200kw motor heavy duty.i need control this motor beacuse it is taking high torque at starting time.
-
Help to find out specification of analog card AD-081-V1 .
please suggest me this analog input card is active or passive?.
-
I found formula for Solid flow measurement:
Q = (WR)
L
Q = flow (kg/min or lb/min)
W = weight of material on section of length L
R = conveyor speed (m/min or ft/min)
L = length of weighing platform (m or ft)
-
Help me to find out how to calculate solid partical flow rate on Conveyor belt.I have CJ1M-CPU11 but it don't SUPPORT PRV ,CTBL COMMANDS. Guide me other way how to do it with same PLC CJ1M-CPU11.
i have cj1m-cpu11 but it dont support prv ctbl commands -
Thank you it is very helpful for me.....
-
Dear all I am having trouble with calculation of PPR to RPM.
I am unable to predict the right answer to monitor rpm of motor speed, actually I am using the proximity sensor for getting pulse per revolution.I have 4 pulses per revolution.Motor is connected with mechanical gear the gear ratio is 13:1 and motor speed is 1480.sensor is fixed after gear output.
-
Dear, i am doing one project on Omron PLC with VB.net. i am using Ethernet communication with VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net
for DI/DO i am using CIO &H0 forreading and &H1 for write but for analog value how i will show on VB.net.
-
HI,
Dear i want to show ampere of motor through fins ethernet can you guide me how to read data from plc through ethernet connection.
i have cpu cj1m cpu11
-
Thanks for all
-
I have CJ1M-CPU11 omron plc with ethrenet and serial port but i want to control through serial port.i have cx-programmer only and i write the ladder code in cx-programmer with address cio and i want to control that code through vb.net window based application.how i can do this please help me.
-
Omron PLC-HOW TO connect and control I/O throug VB.NET
-
Omron PLC-HOW TO connect and control I/O throug
-
I have a plc of cj1m cpu11 with analog input ad081-v1 and other digital input and output module.i want to add it analog input how i assign each input address.
-
PLC IO Table
---------------------------
To open this project, the following CPS files need to be installed.CPS_CJ1M-CPU11_Ver4_0.xml
Install CPS in the following procedure.
Execute the [File - Install CPS] menu in IO Table and restart the support software after completing the installation.
---------------------------
OK
---------------------------
-
how to fix cps file version 4.0
-
Kaiser . I am using my old pv550 but the software erased on this pv550 unexpactdly during using.so i need to install the same software on pv550 and the .pva file is same as which is used already on pv550.so the problem here i facing when i connect it with pc for .pva file installing but first protocol set and then auto configure but when i hit on auto configure then he show unable to find.....message show
Panelview 550
cat 2711-k5a5
ser f
rev D
frn 3.12
win mk1jc7os
texcekl group 90804
pinout diagram of cable nc13
-
Dear Mickey i need the 2711-NC13 Cable pinout diagram.
-
Dear suggest me how i download a .pva file in pv550 and tell me rs232 pinout from pv550 to pc if any other procedure is here so suggest...
i only download a file in pv550 but pv550 not communicating with rslinx and not appear when i configure communication protocol AB-DF1 buad rate 19200 CRC parity after that when i click on auto configure then he show unable to find device
-
i have panelview550 cat2711-k5a5 kepad.the old program has crash so i install same program in panelview550 but the communication link between pv550 to rslinx not up means the pv550 not connected with rslinx or pc.the panelview550 comm led and fault led are blinking one bye one .pv550 to rslinx or pc , the cable for communication i used ere made by me through internet search DB-9 female port to DB-9 female port .when i connect pv550 to Micrologix1200 plc then comm led blinking stoped but with rslinx they not stoped.actually pv550 not connecting or maybe my configuring mistake.
Advanced HMI to CX-Programmer
in CX-Programmer
Posted
Thank you very much