minhpham
MrPLC Member-
Content count
7 -
Joined
-
Last visited
-
mavbr42 liked a post in a topic: Data Log Not Saving as CSV Help
-
minhpham liked a post in a topic: GX Works 3: PIDINIT, PIDCONT
-
udon liked a post in a topic: FX3U Modbus RTU with FX-485-BD
-
Tuane06 liked a post in a topic: FX3U Modbus RTU with FX-485-BD
-
In the GT Designer 3, select Tools>Simulator>Set, the popup window will display for setting, choose the connection type is USB or RS232 and PLC type properly. Hopefully, you can connect real PLC to GT Simulator.
-
Hello Mr. HMI.JR, I see the sampling time you're setting is 1 minute/ data, and 1000 logs/file, this takes around 16.7 hours to finish 1 logging file and CSV file also. Maybe you take not enough testing time. You can try reduce sampling time to 1 second/ log, and 100 logs/file, then test again.
-
Hi Thang, In the manual instruction of FX3U-485-BD, this board don't support to connect GOT2000. You should use the ethernet adapter FX3U-ENET-ADP + converter board FX3U-CNV-BD to connect to any GOT HMI. FX 3U 485-BD Manual Installation.pdf
-
eziccc liked a post in a topic: GOT2000 Blinking lamp with signal off
-
eziccc liked a post in a topic: FX3U Modbus RTU with FX-485-BD
-
Hi Bloggy You can refer the attached file show how to make the script to do the flicker when bit M100 is OFF. You need use the GB2000 - internal bit of HMI, so no need change PLC program. Make a script using bit GB2000.docx
-
How to Connect PLC FX3U to RFID Reader via FX3U-485ADP-MB
minhpham replied to linhquangtran's topic in Mitsubishi
Hi Linh, Could you upload your PLC program, I will verify it for you. -
Hi Deny, FX3U-485-BD just support non-protocol to communicate with third party. So, if you want to use Modbus-RTU to communicate via FX3U-485-BD , you need understand frame of Modbus-RTU. Modbus frame: Address || Function || Data || CRC Noted that you need to calculate the CRC by yourself, I searched the CRC calculation online and fixed CRC value because I only use 1 RS2 instruction. I have already checked the Modbus-RTU via FX3U-485-BD , and it's work well. If you need more information, contact to me via email minh89.automation@gmail.com. I recommend you use the Modbus adapter FX3U-485ADP-MB (+FX3U-CNV-BD) to communicate Modbus-RTU easily. FX3U-485-BD - Modbus RTU.pdf
-
minhpham liked a post in a topic: Mitsubishi PLC Q series to Sato printer using Rs232
-
How to create an user name and password to open a screen?
minhpham replied to srob.tl93's topic in Mitsubishi
Hi Gambit Could you reupload this file for me. I need your file to refer. Thank you so much.