kumarsaurab92@gmail.com

Thank you sir I think This will be best method without using PLC or Other equpments

Thanks sir for replying But In my case analog input method will not work because both Motor Have Different RPM  (Actualley I am planning to take deta from VFD-1 and After Mathematical Operation Put In VFD -2) Is this possible by interfacing Some PLC or HMI.(actulley i have to take deta from VFD-1 and send to VFD-2,VFD-3,VFD-4,VFD-5,VFD-6)

Hi i am currently working on a PU foaming machine actually Machine have itself one 4Meter conveyor and speed of that conveyor autamatic adjusting depending on Density of foam. after machine i have 3 conveyor where finish product will transfer so i need that speed of machine Conveyor and that Extra 3 conveyor should be same so how this is possible. (Actually i need Feed back from  machine conveyor VFD to  other Conveyor VFD)

Thanks   

Dear all I need one help i have one application where 1st time any input comming then one output should be SET. and when 2nd time same input will come this output should be RESET

Dear all I need one help i have one application where 1st time any input comming then one output should be SET. and when 2nd time same input will come this output should be RESET.

Thanks. My problem solved  

OK thanks Now please tell me how to configure DH485 convert to pc.

I was using AIC converter to connect two SLC 500 plc and from AIC convert i used to connect my PC for monitoring of ladder logix. but now my old PC HHD corrupted and i installed RSLogix and Rslinx in new pc but Now in rslinx  1747-pic/aic+ driver not available please help me how to fix it.....

Hello every one. can any one explane me maximum how many CC link card we can configure in one  QJ61BT11N module. and whwt is difference between CC link and Input/Output card