abdoon89

I have a UG430H-SS1 HMI and need its software program. I tried to search Fuji website and appears that the software needed is called POD editor UG00S-CWV4, however, I could not find it to download or buy. Could anyone help me find it? Thank you

Hello all, I have a system that contains a s7 200 that communicates with TOP 270 HMI, the required data to be printed is a report chart that exists within the TOP 270. I tried to configure a printer with the HMI, but all efforts were in vain, I tried to change the language of the printer (Epson24, Epson9, PCL,....), but I could not print out any report. the Print function is programmed in the HMI, but it did not respond. One of the HMIs can't define the language of the printer, the other one could not recognize the printer at all and says that the connected device needs a driver. Is there a configuration that is needed to be done to the printer prior to connecting it to the HMI, or if I have to download a driver to the HMI?   Waiting to hear from you.

Thanks sigmadelta for your response, it seems I got the wrong information.   The system contains a s7 200 that communicates with TOP 270 HMI, the required data to be printed is a report chart that exists within the TOP 270. I tried to configure a printer with HMI, but all efforts were in vain. One of the HMIs can't define the language of the printer, the other one could not recognize the printer at all and says that the connected device needs a driver.   Waiting to hear from you.

What type of printers can be linked to S7 200 CPUs and if there any special requirements?

Thank you @plcfans But this software is dedicated to TP series HMIs. I could not use it for DOP-A series.  

The USB driver is in the program files in the C: path. But the program still fails to open the USB port! Hope this problem ends soon!

I found the 86 edition of the software, however, I could not find the USB driver. Device manager could not recognize the HMI. This name is displayed in the device manager (s3c2410x). Could anyone help with this problem?

Does anyone have a direct link to the Screen Editor 1.05.83 software? It was available in the old Delta website, but now it is not available in the new Deltaww website. I need this version or later versions that can open DOP-A series HMI in windows 7 or 10   Thank you

We have been working on reconfiguring the hidden pars, however, still, we get the AL.37 error, after contacting the manufacturer, ee discovered that the amp has a special software dedicated to Yuken Company and that they use their own list of parameters. And this is why the values copied from the old one never will match the standard Mitsubishi parameters. Can anyone help with this type of software? the Yuken series is called ASR.

I have a defected servo amplifier of a type  MR-J3-11KA4-LC078 that are dedicated for Injection molding machines. I tried to replace it with another one of the same type and size, however, I keep getting the (AL.37) error after downloading the parameters. I tried to ignore parameters dedicated to the manufacturer, but I got another error(AL.1A). which indicates a combination error between motor and amplifier.  I discovered that the motor is a 6kW motor (HF-SP601M4-S2), while the amplifier is 11kW. I tried to reconfigure the drive, however, I keep getting one of the two errors mentioned above. Can anyone help to solve the issue or to reconfigure the amplifier?   Thank you.

Does anyone know how or where to get Zeus software for XLS firefighting panels from Siemens?   Thanks everyone

Thank you very much all. I downloaded the  SETUP161E and will try to configuring as soon as I get the cable. Your help was really great. Thank you again.

I have a Mitsubishi amplifier (MR-J2S-700B) and I need to transfer its parameters into a new one. Unlike other Mitsubishi servo amplifiers, this device has no pushbuttons beneath the 7-segment display. and I tried to use the manual to find a way to program and got nothing. Could you please help with this issue. Thank you in advance.

Hello all, I would like to ask about the best transmitter to measure the level of a diesel tank. the tank is 2.5m high and 1.85m in diameter. I was thinking of pressure transmitter, however, it is not clear for me how to convert pressure to level or to liters. Your help is highly appreciated. Thanks

Thank you Gambit. I see that there is no way to assign editable values to TON_E timers. I will manage to use the time as decimal values.