MrPLC Member
  • Content count

  • Joined

  • Last visited

Posts posted by maniniyot

  1. thanks for the reply man

    btw,  according to trhe manual i have read ,they treated the content of the word device as hexadecimal...then converted it to decimal ,or it depends on the application?


    its hard to be a noob,


  2. hi guys

    Im a bit new to omron programming,i needed to trace some data for my scada system to display, and i have encountered "binary transfer" command and i'm not really sure if i understand it correctly


    any enlightenment in this matter will be much appreciated


  3. Hi guys

    I have a NS12-TS200 programmable terminal , i only need to map the data so i can connect a SCADA system to the PLC

    while mapping i encountered a device which is $W which is "internal memory of the PT" the manual also says that it cannot be read and written directly from host.

    Ex: $W4195, 

    because the $w device is only internal to the PT how or what settings do i have to check to find its equivalent device in the PLC? sorry i am not knowledgable in OMRON automation products

    i also attached a screen shot of the display....




  4. what is the application exactly? as per my experience in servo programming during power interruption or stop of operation via emergency stop,,,i always provide a homing program ..the the DDRVI command is incremental and once the trigger is activated it will always give the exact number of pulse regardless the servo position. . . ..

  5. Dear sirs I Need to upgrade an old HMI unit (F900 series) to GOT 1000 series But it has a password and the maintenance personel have no idea ,the machine by the way is almost 20 years old and the manuals are also missing.... Is there a specific software for cracking the password ? thanks in advance

  6. Hi i need help from you sirs, im a pure mitsubishi programmer with zero experience in schneider PLC I have a SCADA project which requires me to monitor and control data from a schneider PLC using an OPC software im using PL7 pro to communicate with a TSX3721 in a Virtual PC ive been getting a pop up error message when im trying to press the connect button "Not possible to establish the physical link with PLC address SYS via driver" The cable i am using a USB to serial adapter (TSXCUSB485C) though its a china equivalent of the genuine cable I want to know if anyone encountered the same problem like mine and what actions did you use to resolve it. I hope to have an answer from you guys thanks in advance