semenyuk.serg@gmail.com

It was "High byte first". I have change it to the "Low byte first". But without result. I have the same diagnostic message.http://s27.postimg.org/q6prrhaqb/problem4.png

Could you give a hint where I can find byte order for the parameters, please?

Yes, I selected 3 modules. You speak about DP version? It has DP-V0. I have also another module: Balluff BNI PBS-502-000-Z001. And there are the same problems and the same diagnostic message (The parameter transmitted by the master is incorrect). http://s10.postimg.org/72ze5i2s9/Problem3.png (Sorry for link. I cannot attach file)

   No. I have the same message: "The parameter transmitted by the master is incorrect".

Thank you for answer! You mean this option? Unfortunately I have the same diagnostic message

Hi all! I need advice. I have Mitsubishi Q02UCPU with profibus module QJ71PB92V. I try to connect communication module from Balluff BNI PBS-507-000-Z011 via Profubus without success. Everytime I connect module, I see diagnostic alarm "The parameter transmitted by the master is incorrect". All settings were made by default. QJ71PB92V has 0 adress and Balluff BNI PBS-507-000-Z01 has 11. I connected this module to the Siemens CPU-315 and it is work correct. From this forum I see it is common error. What will be the next step to check or solve the problem? I am not profficient in Profibus networks, so I will be appreciate for any help!