toont

MrPLC Member
  • Content count

    5
  • Joined

  • Last visited

Everything posted by toont

  1. Question about PanelBuilder32 .PVA vs .PBA

    PVA is the runtime file for your PanelView panel, PBA the PanelBuilder32 application file.
  2. There is an IP_Info ActiveX Control, but it only works with PanelView Plus CE panels.
  3. Hi all, While upgrading HMI from PanelBuilder32 to FactoryTalk View I encounter a problem using I/O to interface with a PanelView Plus. The communication is defined in RSLogix 5 program as Rack 3 group 2 Size 3/4, range 32-37. PLC communication with the panel is not changed, but buttons in old PanelView using I:34 and I:35 work, in the new PV+ they don't, all bits remain zero. Block transfers Read and Write are all sending data to rack 3 group 2 module 0. While testing I noticed O:32 is used as status bits by the Block Transfers - maybe inputs I:34 and I:35 are also used for somethings similar by a new PanelView Plus? Thanks!
  4. PanelView Visibility Animation Delay

    I have the same issue. The only way I found to improve the button visibility behaviour was switching from indirect addressing (HMI taglist) to direct addressing (for example {::[shortcut]N10/0}. This improves update speed of the button and it no longer blinks after changing displays while navigating the HMI.