zapotek

hi; i solve the problem. there ara transactions on the dcs. for example to write data to the slave function code is 16. Start address must be 40. (it was 30001 or 400001) and there are blocks for write and read data at the dcs. i change the related things in these blocks... the panel i set device addresses to 40040,00 ; 40040,01 ; 40040,02 etc... for reading data from panel; i set the addresses as 40020,00 ; 40020,01 etc... It worked... thanks for your helps cHUD.

hi; i have attached the screenshots of the panels configuration. DCS sends 32 bits; but we can't read then on the touch panel.

hi; i want to attach the pictures of touch screen but i couldnt fibd the attach icon above:DDD cah you help me...

Hi cHUD; touch panel and dcs is communicating now... i dont know how it is done; configuration was same. But now we send bits from DCS to panel but we cant see the changes. DCS has a 32 bit PAKOUT block. I made 15 bool variables at touch panel. Their device address is 30001+00; 30001+01;..........300001+15. I put lamp symbols to the main panel; and connected these bool addresses to this symbols. But their color does not change even i change the bits those are sent from the dcs. What is the problem now? i will send the pictures... thanks

Yes Chud; I tried but didnt work. I will send the screenshots of my configuration. thanks...

Hi; I have a Schneider HMIGTO5310 touch panel. I am trying to communicate it our Foxboro DCS I/A series V8.8. on MODBUS rtu. DCS is always master. I want to configure touch panel as slave but i can't manage it. Is this touch panel always master? We communicate this panel (master) with Schneider PM710 egergy analyzer (slave). But we couldnt manage to communicate this panel with DCS on Modbus RTU? Do you have any comment about this problem. Thanks...