Scarypod
MrPLC Member-
Content count
4 -
Joined
-
Last visited
Posts posted by Scarypod
-
-
Thanks for that Tashinz. I have already configured a Profinet system on a different machine in the way you suggested with no problems. However, I need to work on another machine that I don't have the config file for. I could rewrite it but there are about 50 devices on there and don't want to reinvent the wheel in this case as the machine is already running. Any ideas???? -
Hi all, I have V2.1.0.6 ConfiguratorFDT I have V1.2 DTM (the latest I believe) for the CJ1W-PNT21 (V1.06 or any that I try) I am connected to the PLC through the Ethernet/IP port I can connect to it, download to it, read the diagnostics but.... I cannot UPLOAD the configuration from it. I get a DTM fault V1.2 as shown in the attached image. Has anyone else suffered this or managed to upload parameters successfully? If so, HOW is it done? Cheers Stevie -
Hi all, Has anyone any experience of configuring a Balluff IO Master BNI EIP-502-105-Z015 BNI004A with Omron Network Configurator? The PLC is a CJ2H Ethernet/IP model. Basically I have the Master with three BNI IOL-310-000-K025 (16Bit) units hanging off the IO Link ports. They are to be assigned as follows: - Bit 0 - In 1 - In 2 - In 3 - Out 4 - In 5 - In 6 - In 7 - Out and so on up to bit 15 as an Out. I have never used these with Omron before and can only find reference to them with AB. Any ideas/pointers/solutions, etc would be great. Cheers Stevie1 person likes this
ConfiguratorFDT
in Omron
Posted