Angel David

Hi Guys, I have a relay part number 700-TBR60 which I understand is electro mechanic and a client wishes to change to solid state will know someone which is the part number for the same equipment but solid state. Thanks a lot guys.

Hi there I have a panelview in plant and when I try to buy, it tells me this obsolete, someone will know what is the recommended replacement for this equipment Rockwell, part number is 27711P-T7C4D1 or when i can found this number replacement part thanks a lot guys for the help Angel Leiva Project Manager Ingenieria Autintrol CA 584242608153

thanks for the answer, Thanks for the answer if I use the second option as could communicate because I am not sure that the GE D400 talk modbus if you saw at some manual please show me which thank you very much for your time

Hey guys I need to connect an XT Controllogix L63 with a GE D400 via ethernet to send some variables for SCADA and I've never done this setting if you could tell me how I can do this would be very grateful

Hi there I need to configure a GE D400 gateway to communicate with an XT controllogix through ethernet addition to also communicate via optical fiber with ABB RED670 controller for some variables and that these become available for a scada I have experience working with teams allen Bradely but never configured the gateway if you could tell me how to start would be grateful. thanks for the attention

Hi there, I have a PV1000 and need Give you an upload by PanelBuilder but is giving me the following error "Error [2539] Another station is the program owner" I do not know what else to do thanks for the help.

Hi there i have a trouble and i can't find where is the origin of trouble. My problem reside in one PLC5/40, this device have 15 years about working without troubles, suddenly about 6 months ago he start with a random failure which i can resolve with some tricks however this its not have apparent cause. the first trouble i had was the equipment lost communication intermittently, i resolve this changing the wire between the PLC and the Panelview but i tested the wire and its ok. later the equipment go to fault because one timer preset it was written in negative, i corrected this placing in logic the consideration of, it was negative dont write, however this thing never happen in 15 years. later the equipment go to fault because one counter preset it was written in negative, i corrected this placing in logic the consideration of it was negative dont write, however this thing never happen in 15 years. I think this failure its because the equipmente its broken, but i can't find any paper or technical document where indicate this failure its a hardware failure if you know where its the trouble about or where find a technical answer i won't be able to thanks enough. Thanks for your time guys !

Thanks for the answer the application was successfully modification according yours advice.

Hi there, i have a trouble, i have one architecture compose of two SLC-5/04 and two PanelViews 1000 (as a shown in the picture attach) connected through a DH+ network and i need eliminate one panel and one controller but when i shutdown this controller the panel show a message "Node not active in the network" and i can't do anything to operations in the panel. i want to know what need eliminate in the applications of the Panel and controller to eliminate this message and can operate my process normally. send you attach the application of 2 controllers and 2 panels to see if any of you know how can resolve this problem. mixta ret moldes.rar

Hi there, i have a trouble, i need migrate a PLC 5 to ControlLogix this migration includes a seriously changes of logic, we dont have interested in migrate the complete aplication with the tools used for this purpose in Rslogix 5000 anyway we want develop the entire project for reduce the numbers of the rung's stay actually in the project i dont have the list of signals of the project and i need built this with the I/O actually already wire to the PLC 5 but i don't understand how its develop this configuration this with the aim of calculate the quantity of the spare to leave the appropiate. sending attachment file backed PLC I need to know the I / O if any of you can help me with this, i will be really gratefull thanks for your time guys

Hi Ken, thanks for your advice when i review In the RSLogix 5000 main menu, select Logic -> Map PLC/SLC Data Tables. and i can solve the work without any trouble, today download the program to plc and panelview and every application it's working that should be. Thanks for your time

Hi there, I have a controllogix 5555 (to which I connect with my laptop and a usb-serial converter RS-232 and I can perform logic upload and modify online without any problems), this controller is connected through a 1756-DHRIO card to a view panel 550 by Datahighway +. to backup the application of panelview I connect to a 1784-u2dhp converter to the card in slot 1 controller rack (1756-DHRIO) by PanelBuider32 software and perform the backup of the application without any problem. my job is to add a numeric entry in the panelview, that allows setting the value of an integer in the logic. when reviewing the panelview this database is configured oriented to addresses and not oriented to tag, how generally work the controllogix system. besides this review backplane settings in RSLogix 5000 and I can see that the card (1756-DHRIO) is not configured on any controller slot. I was checking on the internet according to a configuration exists which allows the card to place 1756 DHRIO as a gateway between the controller and another device, but yet do not understand how to perform this configuration. if anyone has done this configuration beg please help me with your experience. my question is where I set the tags from the database for use in panelview logic in RSLogix 5000 controller and configure the card as 1756 DHRIO? i send attached image of database panelview and backplane configuration in RSLogix 5000 controller.

Hi There I need to configure a PanelView C1000, understand the configuration of the computer is via a webserver running on the same computer, I communicate with an Ethernet cable and create static screens I need, but I have a problem do not know how to solve. I need to hide buttons maintenance user privileges. Since maintenance user is created but not how to set the button to appear when the user is logged, somo Does anyone know I can display these buttons when the user logged maintenance this?

Hi there!! I can establish communication between FactoryTalk and Frick Lx Controller, it was very simple, The Frick LX Controller dont use any software to configurate the network parameters and this configuration it's realized through operation screen, i just setting the IP adress, subnet mask and default gateway, and activate Modbus TCP/IP check in this configuration page. The rest was normal configuration to KepServer in Factorytalk Creating the channel, Controller and points and then add new OPC server in factory talk and then assigning the tags in the database to OPC previously created. I hope this information will be useful to any user the forum and thanks for your time.

Hi there! I have a pv 1200 which need to migrate to a PV 1000 plus actual communication with the PLC is made by RIO and need to migrate to DF1, I presented a routing problem because in the current configuration of logic arrangements made ​​within integer binary data and must concatenate and truncate data in FactoryTalk because customer request PLC logic should not be modified my question is anyone knows how to truncate and concatenate an integer data in FactoryTalk? Also if I create a tag in the database and configure FactoryTalk as integer and pointed to a double integer data in a truncated plc on the top or the bottom of the data?.