i_andr3y88

Hello, I need to know if works puting a serial adapter CJ1W-CIF11 on my CP1E-N60DR-D built-in RS232 port. I ask that becouse I have an application where I need to connect to that CP1E 5 MX2 inverters using the RS422/485 CP1W-CIF11 option board and another 10 touch-screens NB5Q. The only way I can connect 10 NB's is using RS422/485, and CP1E-N60 has a built in RS232 and room for only 1 option board. I couldn't find in CP1E user manual or other documents if that combination will work, and that's why I'm asking for your help. Thank you in advance!

Thanks man, you helped me a lot.

OK, but where can I find this "firmware upgrade tool" for NT2ST? Becouse I google it and nothing useful shown up. So if you can help me again, with a link perhaps, I would be grateful. Thanks a lot, MPM!!

Hi guys, I have a problem with my NT2S-SF122B-EV2. I wanted to make an application to work for a CJ1M. First I've downloaded it using NT2 ST v1.3. Worked nice, but I wanted to use some alarms, and I couldnt do that with this software. So I've downloaded it with NTXS v1.04, but NT2S wasn't responded well to my commands (screens were switched with a delay, I cannot make use of F3-F6 keys...). So now I want to use again NT2 ST do download application, but this time it cannot connect to device. So i've tried to erase memory (i manageto do so pressing F1+F6 keys at the startup, but this only erases the application, not the firmware). So the big question is: How can I get rid of that firmware from NTXS, or how can I use again NT2 ST to download someting? PS: The connection with PC was made using NT2S-CN002 cable. The comm. settings were the same as when I've downloaded the application for the first time with NT2 ST, so the problem is elsewhere. I need urgent help, PLEASE!!