tintin2005

MrPLC Member
 View profile  See their activity

  • Content count

    13

  • Joined

  • Last visited

Posts posted by tintin2005

  3. Posted

    Hi Jay.

    You are Super.... thanks.

     

    And with this one is it possible? it is the omron original   9 pin db9 and omron 20 pin with the interface box.

     

    thanks!

     

     

    cable.jpeg

  4. Posted

    Hello !

     

    Can i connect to c20h controller  with cable attached?   i have the serial port connected to a nt20 and i need to go online without disconnecting nt20.

    is it possible?

    thanks

    cable.jpg

  9. Posted · Edited by tintin2005

    Hello. I am trying to conect to a CPM1A-40CDR-A-V1 omron plc with CQM1-CIF02 original used cable. As he as a db9 male i adapted it to a db9 female folowing this diagram: http://forums.mrplc.com/uploads/monthly_02_2010/post-2041-1266502872.png but my cable´s db9 as some strange conections as you can see in attached photos. i think that this cable was used to connect some omron plc to a printer orto a NT20 hmi. probable someone changed the conections. pins 4 and 5 should be conected but as you can see there´s no wires connecting them. ad there´s some cutted wires... My cqm1-cif02 seems to have this connections ... http://forums.mrplc.com/index.php?app=core&module=attach&section=attach&attach_id=9960. Has anybody got the colours to pin number? Can someone open a good working cable and share the connectiosn info? Some help would be NICE! regards tintin2005

  10. Posted

    hello guys. Let me say that i am a beginer in this stuff.... I had a magelis xbt f032110 that was comunicating with a tsx 3721 (Micro) and it got broked . As those magelis are obsolete i converted the app with switch2vijeo to adapt it to xbtgt 2220. Because i don´t have a xbtgt2220 i changed the target device to xbt gt2330. i have corrected the conversion errors and creat the new cfcard project. i made the comunication cable XBTZ9780. the plc is working with unitelway protocol and worked fine with the old xbtf032110. Now it always says " No reply from PLC within Timeout period. (UniTelwayEquipment01)" Can anyone help me to make the correct tunning for the unitelway comunication? regards tintin2005

  12. Posted · Edited by tintin2005

    hello jay. thanks for your fast answer. I´m going to make the cable and try again. Do i need this 3G2A6_LK201? or it´s direct to Personal computer? The LSS and SSS dos software available here in the forum has full working capabilities? regards tintin2005

  13. Posted

    Hello there. I need to download the application from a Omron C20H plc and have already tried with severeal cables, but had no success. Is it possible to do it with a simple hand made cable, or i need to use this intergace 3g2a6-lk201-ev1? I read somewhere that i could comunicate with C20H with a simple cable. By the way, with hand made one i did receive some errors, but now i do not have here the printscreens that i made. later i will put them here and i hope that somebody wil help me. regards From pT tintin2005