Georgios
MrPLC Member-
Content count
23 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout Georgios
-
Rank
Sparky
Profile Information
- Country Greece
-
maybe you can check for hardware error with PLC diagnostics function?
-
Hi, I ve been thinking of connecting two FX3G plcs and an HMI on a local Ethernet, which ethernet adapter is reccommended for FX3G? Thanks for reading! Regards, Georgios
-
Remote I/O module (CC-link) on GX IEC Developer
Georgios replied to kwnstantinos's topic in Mitsubishi
Just use the 8 Inputs not the outputs, u can also use just the 8 bits of the 16bits RemoteInput -
Remote I/O module (CC-link) on GX IEC Developer
Georgios replied to kwnstantinos's topic in Mitsubishi
Hello Constantinos, I think you have to use an FB named " RemoteInOut_8Bit " All the best! -
I have problems with Q usb drivers for Windows 7 with 64bit processor, is there Mitsubishi support for Windows 7 ?
-
Also, if you remove from the rack this module you should see DIP switches on the side (node settings)
-
If you want to program your PLC remotely, at first you need to establish connection (PSTN,ISDN,Internet,..) between your programming platform and your PLC. eg You could connect a serial modem with 232port of 1101, connect local and remote modem, and use transparent mode to program your PLC
-
Thank you for assistance, i ll try these new FBs!
-
Thank you, it looks to me that it is not possible to exchange data between 2 or more UDEs, better use something like Qm CPU and QJ71 ethernet module
-
Thanks for the reply, However, i am sure there is nothing wrong with my national SMS provider number because when i replace FX3U and i connect Alpha XL to GM106 my system is working as expected. I claim there is something wrong with hardware. Did anybody make FX3U and GM106 communicate? Regards
-
Hello! Simultaneous broadcasting using UDP protocol on Q systems is working and performs very well! I don't know about the performance of other configurations. Hope the best for your system!
-
--This configuration is working, want to try? 3U_ENET.rar
-
Hello everybody, Has anybody experienced multiple Q UDE data exchange? Moreover, can i exchange data (fixed buffer) over Ethernet between eg three Q03UDE using only a common switch (no hmi, no scada), built-in Ethernet ports, and cheap CAT5 cable ? Thanks