zolti103

i successfully upload all the files from PLC 1st i get the module list and then use upload command one by one for all file names, but it consumes a lot of time, is there any way to upload all the files from PLC using single command or is there any special word to be put in module name of upload command to get all files in a single attempt. what could be the maximum of approach of diagnose mode of B&R, is all programs of B&R could only in C language or it can it support STL,LAD or FBD like other softwares, i have AUtomation studio AS 3.0.71 regards

i have CPU all the IOs are inserted no more IOs can be inserted and TER is directly conected to interface ADAPTER cable, can you please tell what exactly should i put in following fields of unitelway driver configuration fields, if you have any document regarding all the details of 'unitelway driver' and 'xway test' and in which mode PLC should be for successful communication with PC (RUN, STOP, DIAGNOSE) cpu only has 1 button for diagnose mode Thanks with anticipation

thanks for reply, but i cant understand your message i can only understand english regards

Hello, 'TSXPCX3030 device driver' is listed in 'ADD/REMOVE PROGRAM' tool of windows in control panel my OS is winXP SP2 as i have told that i have been tried different values for each function(i.e baud rate, parity, remote address, unitelway slave address,delay values........ etc) please tell me the exact values for each function i must have to put for the successful connection.. is battery or memory card must required for it ?? and what should be the status of PLC for communication to the PLC Best Regards with Great Anticipation

yes i have been installed the drivers Driver Manager version = 2.5 IE18 Unitel way version = 1.6 IE16 the cable is successfully detected in Driver manger of windows XP at COM3 PORT...all information is in my first thread to this topic regards

Hello, i have a B&R cp260 CPU my software and cable is working perfectly as PLC online and program downloading is carried out successfully, i wants to upload the machine software from CPU having a program on its PCMCIA CARD, i use upload command in PVI transfer tool it ask for 'module' name i enter the name from the module list which i got from the function of PVI tool, it start uploading but stops on error 'module identification failed', is there any way to backup complete memory card on computer through B&R CPU. for uploading without B&R CPU i insert that card into PCMCIA slot of LAPTOP it got detected by windows but i dont get drivers for that card plz tell me the solution Many thanks in ADVANCE

thanks for reply and sorry for my very late reply actually i was out of station.. my OS is winXP SP2 as i have told that i have been tried different values for each function please tell me the exact values for each function i must have to put for the successful connection.. is battery or memory card must required for it ?? Best Regards with Great Anticipation

Hello, Dear i have a telemechanique PLC TSX 3721 series i wants to upload program from it, i have PL7PRO v 4.5, software, unitelway drivers 1.6, and a USB cable USB-TSXPCX3030(new OEM version not the orignal one, toggle switch at RX position), i have installed all the software properly i connect cables 1 end to PC USB port and other to PLC TER port, as the cable is detected on com3 i edit the com address in schenider driver manager in unitelway configuration to COM3, by default baud rate 9600(aslo tried on 19200), parity odd (also tried none), 1stop bit, 8 data bits , link type=unitelway, force virtual com port enable(also tried disable ), then i go to xway test, here remote address=0.254.0(by default) then i click 'connect' the status shows 'connecting' never shows 'connected' some times computer gets hang. i have tried this procedure on 2 same model CPU, 1 brand new without program, without memory card and battery, RUN indication OFF, battery indication ON, ERROR indication ON and TER indication is blinking, and other CPU is old one (with program )showing RUN indication ON, ERROR=OFF, BAT= ON, TER= slightly blinking. please help me for getting CONNECTED with CPU, if u suggest for conflict in OS version of part then i think after getting connected with cpu i can upgrade or downgrade the OS version using OS-Loader utility.. please get me out of this trouble I will remain thank Full to you. Regards with Great Anticipation