yome
MrPLC Member-
Content count
19 -
Joined
-
Last visited
Community Reputation
1 NeutralAbout yome
-
Rank
Sparky
Contact Methods
- ICQ 0
-
amir sayahan liked a post in a topic: [Other PLC Demo Software] - Mini-Scada Pro 1.1
-
To close = Fermer, Sceller Device for closing carton box flaps = Machine à fermer les cartons Bon courage (good luck )
-
TSX CUSB 485 - Converter use
yome replied to macflight's topic in Modicon / Telemecanique / Schneider Electric
http://www.soft-control.fr/articles.php?id=32〈=en -
Found the solution: My customer have an other site with exactly the same old PC, so i've done a hdd "ghost" and re-install the app. Works fine...
-
Thanks for all anyway. To be continued ...
-
Thank you per advance Ron. In fact i've already downloaded the 5.1b version from Wonderware support site. The problem is when you run the application, InTouch try to convert it 5.0->5.1. But to do this you need a dev dongle... that i haven't...
-
I'm looking for a very old version of Intouch v5.0. I need to rebuild a old pc for an old installation (approx year 1995) ! Anyway the only thing I have is the dongle. No cd or floppy disk. Wonderware can not help, too old also for them... So if you can
-
Here is the doc file from your project. Done with XTel TCK.DOC
-
JC is right. I've used the PRU to get back a TSX21 program by linking the suitcase printer connector to my laptop. Here is sample code: 0102 L 775 0103 AN425 0104 = 421 0105 =N777 0106 LN202 0107 A 425 0110 O 262 0111 AN215 0112 = 262 0113 LN203 0114 A 425 0115 O 263 0116 AN215 0117 = 263 0120 =N777 Anyway if the plc is a PLS 511S you can use EDOPS2 software.
-
File Name: Omron Fins UDP Request Pro File Submitter: yome File Submitted: 29 Apr 2007 File Category: Utilities This software allow you to send Omron request to an Ethernet/Ip connected plc. So you can test communication link upload data and then export them etc. Click here to download this file
-
-
Recommendations/Tips for Industrial USB -> RS-232 Converter?
yome replied to brianafischer's topic in General Topics - The Lounge
USB converter will work with some software but not with all PCMCIA is the best choice but not work exactly like real com port. It's why, in my company, we buy Dell laptop with serial com port inside. -
By experience, using a usb to rs232 converter is not possible with S5 software. You must use a real com port. However it exists usb cable with S5 software patch (not tested). http://www.process-informatik.de (German)
-
File Name: Mini-Scada Pro 1.1 File Submitter: yome File Submitted: 22 Feb 2006 File Category: Other PLC Demo Software Mini Scada Pro is like sounds its name a mini Supervisory Control And Data Acquisition. It has been designed in order to help in debugging automated systems. New version 1.1 Click here to download this file
-
-
Why not my little scada software ? http://forums.mrplc.com/index.php?autocom=downloads&showfile=516 It's exactly for the same reason I've decided to code my own soft: I was needed a scada software to debug my plc program and commercials softwares are (often) expensive...