Sebu

MrPLC Member
  • Content count

    43
  • Joined

  • Last visited

Everything posted by Sebu

  1. I am trying to install Step 7 basic Version 11 software to my laptop. I am getting an error during installation stating An error occured during installaion of Microsoft Installer (MSI). I have attached the error screen shot for reference. I am working with OS Windows XP Professional SP3, 4GB RAM Can anyone help what would be the problem for this error? Thanks Sebu
  2. Hello All, I am using Compact Logix L35E controller and Panel View 1200 for a project. I need to synchronise the HMI time with PLC. Can anyone help for synchronizing the time. Thanks Sebu
  3. Hi, I have a older PLC(I could not find the make or part number of the PLC) which are talking with Phoenix contact I/O’s through Interbus S. There is one RS232 port free in the Interbus adapter. I would like to know whether I can communicate with Wonderware through the Interbus adaptor module. Please help me with solution.
  4. Hi, I am working with ML 1400. I have a Digital flow meter connect to Input. I am using HSC Funtion for catch the pulses and to calculate flow. I tried to simulate the input and get the pulses in HSC but its not functioning. I have configured the HSC as well. I have attached the program file. Can anyone help in solving the problem. Thanks Sebu HSC Functionality.RSS
  5. Hi All, I am working with Micrologix controllers. I would like to know how can we calculate Flow (example: interms of GPM) based on the pulse inputs. In my case I am using paddel wheel. If anybody have the logic can you share with me? Regards Sebu
  6. Hi, I am working with Intouch 10.1 . I would like to configure some parameters to be configured to Historian. Can Intouch be directly configured to Historian without System platform?
  7. GE Proficy Machine Edition issue

    Hi, Am using Proficy Machine Edition software ver 6.0(SIM 5) and facing an issue. My PME software goes blank once i tried to open my project, i don't know what is the reason behind that. I can able to open the sample project, this is for your info. If anybody is having an idea to overcome this issue, please share with me and their efforts are highly appreiciated. Further, i have attached the screen shot of the same for better understanding. Thanks in advance. Regards, Sebu PME Err Screen.bmp
  8. Siemens Sequence timer

    Hi , I am working with Siemens Simatic Manager. I am working with sequence which involves 50 steps. Each step will be going through specific time and I have to use the same timer. At end of specific step the timer needs to get rested and new step preset values will be given to timer. I face a problem at end of each step while the timer gets reset. Can any one help me how the timer can be formed. This would be of great help. Sebu
  9. S7-300 download error

    Hi, We are getting error code 13:4589 while we download an empty program to S7-300 controller,we have attached the scree short of ths same. We checked version detail also and they were found matching. Kindly let us know were we went wrong? Regards Sebastin
  10. WinCC Flexible Runtime

    Hi, I would like to know is there any settings to create runtime for the project. I have a sample project which I downloaded from site which can be run in runtime but the Project I have developed cannot be run in runtime. Can anyone suggest how this can be sorted. Regards Sebu
  11. Faceplates in Wincc

    Hi I am new to Wincc. I am working with WinCC Flexible 2008. I am done with program. I have used Functional Blocks for motors and Analogs. I have not used UTD. I have now started with HMI creation. Can anyone help me how to create faceplates for multiple objects. In help files I can see Faceplates are created for objects that are created as UTD in the program. Can anyone help to solve this issue. Regards Sebastian C
  12. Hi, I am new to Siemens Product. I have to use WinccFlex 12" Touch panel for my new project. Estimated number of screen is around 50. Approximate number of Tags wil be below 300. Can any one suggest me what Wincc software version and Hardware I need to use. Sebu
  13. Retentive Timer

    Hi, Can anyone help me what Timer I can use for Retentive timer in Siemens that is similar to RTO timer in Allen Bradley. Like the timer should be running when ever start input(S) is high and it has to hold the timer value when Start Input(S) becomes low. Again when start input(S) is high the timer should start from last hold value. Help please............ Regards Sebu
  14. Hi , I am new to Fanuc products. I am now working with Proficy Machine Edition 5.9 Ver, IC695CPU310 and Quick Panel. I have completed the programing and now I want to download the program and HMI to controller and Quick panel. I am planning to network the setup using Ethernet. Can I get help on how to assign IP addresses for Controller and Quick Panel. Once IP address has been assigned how can I communicate Controller with Quick Panel. Can I get help from anyone? Regards Sebu..
  15. WinCC with Wonderware

    Hi, I would like to know whether it is possible to acquire datas from WinCC SCADA to Wonderware. If anyone had tried this please help me.
  16. Hi, I am new to GE Fanuc PLCs. I have installed GE proficy 5.90 software and I get a error while opening the Proficy software. I have attached the error for reference. Can anyone help in this regard. Regards Sebastian C
  17. Hi, I need some clarification in parameter passing using Wonderware Intouch. I have more than 100 motors. I need to have a popup for 100 motors for providing Manual start and stop from operator station. Its not possible to create 100 pop screens for 100 motors which will be confusing. I would like to have one pop up screen which will serve for all 100 motors. I would like to know how the parameters can be passed to the popup by clicking the motors. Regards Sebastian C
  18. Working with GE proficy ME 5.9

    Hi, I am going to work first time for a project in Proficy ME 5.9. I heard that thi package come with programing tool and SCADA tool.I have experience with AB and Siemens softwares. I would like to know is it easy to learn Proficy and directly work with projects with prvious experiene of AB. Where can I get help manual for Proficy ME 5.9. In GE site it ask for registration. Can anyone help me by providing the manual. Sebastian C
  19. Hi, I am working for project execution where I need to get Data from RSView 32 to Wonderware, both are installed in different PCs in same network. I have RSLinx Professional in the PC where RSView 32 has been installed. Can I configure RSLinx professional as a OPC server to get datas to Wonderware. Can anyone guide me in this regard. Sebastian C
  20. Hi, I like to know the possibility to fetch the data from Excel to Wonderware Intouch. Sebastian C
  21. Thanks Rod. I would go for networking the SCADA PCs. I will get back to you if I face any probs. Sebastian C
  22. Hi, I have a different SCADAs installed in a 5 PCs which has Serial port. I would like to get the data from all the SCADA to the OPC server which has been installed in another PC. If I use a serial to Ethernet converter what are the things I have to look upon. Does this serial to ethernet converter helps in getting data. I need your help in this regards Sebastian C
  23. Project BackUp- Intouch

    Can anyone explain me how to take a project backup in Wonderware Intouch SCADA.
  24. I have 18 SLC 5/03 PLCs. I have connected 12 PLCs in DH485 network. If I try to add one more PLC to existing network the speed of the network is becoming very slow. Could anyone suggest me what can be the problem? What are the parameters should I look at? Sebastian C
  25. Hi Bob, There is no messaging between any PLCs. All PLCs are for independent process. These are connected to DH485 network for the reason the data from all PLC should be displayed in SCADA.