ballvietnam

MrPLC Member
  • Content count

    24
  • Joined

  • Last visited

Community Reputation

0 Neutral

About ballvietnam

  • Rank
    Sparky

Contact Methods

  • Website URL http://
  • ICQ 0

Profile Information

  • Country Australia

Recent Profile Visitors

2599 profile views
  1. Hi In Quantum hostandby PLC I dont know what happen If the communication of Primary and standby fall even CPU of primary is running and controlling ( for example: the cable is cut out). for this situation whether Standby take over become Primary? best regard
  2. I know we can use modbus TCP for twido PLC that is supported ethernet. We use EXCH3 to transfer modbus frame from master( client) to slave( server). But in help file we don't have any structure of frame.I know modbus TCP frame has MBAP header, function code, data but I don't know how to apply for Twido. for example I want to read two word from slave: %MW100 and %MW101. how should I define the table ( frame) and use EXCH3 in twido ethenet port I have configured IP slave address :137.123.12.1, index:1. thanks
  3. as in my experience: for modbus protocol you use Configure " Express Communication" : Exeternal IO device -> Schneider Electric -> Twido -> ( you can choose modbus RTU or Modbus TCP) and next in variable tag: in address: 40001-49999 for register out, you can write from citect to twido) ( for example : 40001=%MW0) 30001-39999 for register in you can read register from twido ( 40001=%MW0) you try more with 00001 for %M0 out 10001 for %M0 in Port is 502
  4. Premium messaging service

    thank for everyone. I done it already
  5. Hi everyone I am trying to communicate two Premium PLCs by using messaging function. I have two premium PLCs ( ETY port built in) with IP address : PLC1: 135.124.15.1 (Server) PLC2: 135.124.15.2 (client) I want to exchange data between two PLCs by using modbus TCP protocol ( client/Server), But I don't know how to configure which is client and which is server. I configured and programed for PLC2: in IP configuration : IP address : 135.124.15.2 I ran two PLCs but I have not had result. please give me suggestion thank a lot
  6. Hi everyone I have a problem when I try to update concept 2.6 SR5. I have already installed Concept 2.6 SR1 trial version and I want to update to Concept 2.6 SR5 but I can not. When I installed the file update of Concept 2.6 SR5 It display the message :" You haven't selected a directory where concept 2.6 is already installed" I sure I installed Concept 2.6 SR1 trial version at "C:\concept " folder, and I chose Destination folder is C:\Concept. Thank for your help
  7. as in my experience: for modbus protocol you use Configure " Express Communication" : Exeternal IO device -> Schneider Electric -> Twido -> ( you can choose modbus RTU or Modbus TCP) and next in variable tag: in address: 40001-49999 for register out, you can write from citect to twido) ( for example : 40001=%MW0) 30001-39999 for register in you can read register from twido ( 40001=%MW0) you try more with 00001 for %M0 out 10001 for %M0 in
  8. Modicon PLC software

    thank everyone I have aready had Unity Pro 4.0 thank everyone again
  9. Twido and Citect

    THANKS A LOT I WILL TRY
  10. Hello Everyone I am trying to exchange data between two Premium PLCs by using Global Data. in PLC1 I configure : in IP configuration tab : IP address: 192.168.1.51 in IP Global Data tab : Group address : 239.255.255.254 group name : group_1 in PLC1 I configure : in IP configuration tab : IP address: 192.168.1.52 in IP Global Data tab : Group address : 239.255.255.255 group name : group_1 and two PLCs have the same variable : name : speed Type : int Address : %MW100 Global data : PUB Group : Group_1 ID : 1 Is this correct? I run two PLC and try to change the valuve of %MW100 in each PLC but the valuve of %MW100 in other PLC can not change thank for your regarding
  11. Hello everyone, I have a problem when i try to connect Twido TWDLCAE40DRF and Citect.I use ethernet port how to connect Twido and Citect by using direct driver. In citect I can not import the *CSV file that i have created from twidosuite. the error: "Operated has failed" thanks
  12. citect and tsx premium

    hello everyone I am using Premium PLC.I have used OFS to connect PLC and Citect already. But I want to use direct driver to connect Premium and Citect.My problem is I can not link the Bool tag or Ebool Tag from unity pro to Citect.For example I can not link the EBOOL tag %I0.2.0 to Citect. i am waiting for your help thank
  13. Hello everyone I have problem went i try to connect twido and citect 7.10 use direct driver.Protocol is modbus TCP/IP I can not import the *csv file that i have created from Twidosuite. I meet the error:" unable to import tag the operation has failed" i am waiting for your help thank
  14. Redundancy for Premium PLC

    first of all, I thank for your regard I know what you worry.I send you this document that I received from an expert in Schneider Electric.I hope you can find useful things.I think we have the same concept