Arun Opto 22

MrPLC Member
  • Content count

    34
  • Joined

  • Last visited

Everything posted by Arun Opto 22

  1. Some PLC analog input cards (4-20mA or 0-10V) are listed as "RMS". I know what RMS means in math. But in the context of an AI module...why would someone choose this? Or, stated another way, what benefit does it have (either for the PLC user or even for the PLC manufacturer)? Thanks in advance, Arun
  2. Why "RMS" Analog Input?

    Yes pcmcartney1, I think you are right in that it has to do with measuring AC Voltage (because an average would be "zero"), so RMS is used. The voltage for 4-20mA and 0-10V is DC.
  3. Why "RMS" Analog Input?

    b_Carlton - Thanks for the reply. Here is a link to an example, SNAP-AIVRMS Arun
  4. On Ethernet/Modbus-TCP, if a device is a Master, can it get polled by another Master? i.e. Can it act as a slave as well. Thanks, Arun
  5. I know this is an old discussion...and I might be able to answer my (new, related) question if I continued at RA's website for some more time (but I've spend about an hour so far): I'm having trouble understanding the architecture -- What is RSLinx versus FactoryTalk? My bottom line question is "what is their OPC Server, and will it talk to a third party OPC Client"? The client is an OPC UA client, not DA, but I'm curious for both third party DA and UA clients. Any help is appreciated.
  6. CompactLogix with 1769-OB8

    Guys - thanks. It was indeed the right end terminator. Bought one, put it on, and all systems go. Silly one - sorry.
  7. I have a CompactLogix L32E, and am simply trying to add and configure one I/O module to it: a 1769-OB8 (24VDC source DO). I've physically attached them, and have added them module to my RSLogix5000 configuration (backplane), but I get an "I/O Not Responding" blinking light when I go online and/or run mode. My fear is that I've got a controller and module of different vintages. I bought the controller in 2008, new from an AB Distributor. But, the module is from E-Bay recently. But I don't know if that is the issue....maybe I'm doing something simple wrong? I've attached screen captures of my RSLogix (V17) controller configuration, the module configuration, and the sticker on the side of the module. Any help and/or ideas are appreciated. Thanks, Arun
  8. CompactLogix with 1769-OB8

    PS - I just realized that I don't have a "right end terminator" cap after the DO module. Maybe I need that?
  9. expand AB with OPTO22

    I saw the post and refrained from replying since I work for Opto 22. But, since my name was mentioned, I thought I'd go ahead (and do indeed second Sparky's suggestion that I can be contacted for more details or a web demo...no problem). I won't speak to "good or bad", because obviously my opinion would be seen as biased. I'll speak to "why": We implemented ODVA EtherNet/IP about 2 years ago on our I/O so it could be used with Logix PLCs for the purpose of "Distributed Processing". Opto 22 SNAP I/O is "intelligent", in that you can do functions down at the I/O level like counting a DI, pulsing a DO, clamping an AO, and running a PID loop. All this can be done without any RSLogix programming. Our configuration tool is simply "drop boxes, radio buttons, fill-in-the-blanks". Taking a counter for example (the most simple) - - A normal DI module and point on that module is "intelligent", in that it can be configured as a counter, and deliver counts back to the Logix PLC. And, the PLC can, upon appropriate condition, write back to the I/O to clear the counts. So, each point has accessible "attributes", and these attributes can be configured, read, and written to. Further, this configuration can happen on the fly. For example, if you've configured a DO to be a pulse, and on condition have set it to pulse 1,000 times...you could, in your Logix, say that if a machine or process condition dictates, change the nature of that attribute to be, say 2,000 pulses. The purpose of distributed intelligence is to both de-burden the PLC (less code, less memoryusage, better scan times), as well as offer sophisticated programmers to take advantage of these intelligent attributes in their control scheme. The "no programming", is wrt Logix PLCs and implicit messaging. We also support explicit, so you can use SNAP I/O with SLC 5/05 and MicroLogix 1100/1400 (via MSG commands). We've got lots of successful installations. I've been personally involved in about 60 or more. We promote the distributed intelligence, though I must admit a lot of people have bought based on price...."a lower cost, reliable I/O system that easily talks EIP to A-B PLCS". No need to learn a new programming language to use it. You work in what you're familiar with, RSLogix5000. (Sorry - this may indeed have sounded like a sales pitch, but that's not intentional). I invite others to continue commenting, as I'm curious as to what others think.
  10. Inexpensive Ethernet/IP I/O

    It looks like you've already gotten some great suggestions. One I'd like to add is SNAP I/O from Opto 22. Opto 22's "IO4AB" (I/O for A-B) is great for implicit messaging with ControlLogix or CompactLogix, and can also be used with SLC 5/05 or MicroLogix (using explicit messaging). Cost is reasonable, and the thing it does differently is the ability to do "distributed processing", w/out having to learn any new programming. All configurations (done in RSLogix5000 and a free EtherNet/IP config tool). Please check out this short video when you have a moment: http://www.opto22.com/players/bc_player.aspx?bcpid=30182984001&bclid=30105620001&bctid=9248245001
  11. MicroLogix Availability

    Sorry I did not see the post on March 18 with tons of replies! I thought I did a search in the search box....but I guess I could have just scrolled down.
  12. Has anyone had trouble recently w/the availability of MicroLogix?
  13. MicroLogix Availability

    Thanks Mickey & Bowhunter
  14. I'm sure this is a common question, but I did a (quick) search on the Forum but didn't find anything. In my RSLogix5000, in the Communications "Project Path", I have IP Address/Devices listed that are years old and long gone, but I see no way to delete them from my list of Project Paths. I imagine this/RSWho pulls from RSLinx, and I didn't see a way there either. Not a big deal, but if someone knows how to delete, please let me know.
  15. Deleting Device from RSLinx

    Thanks All. Sorry for taking so long to check responses (have been swamped). Also, I apologize for not really understanding the relationship between RSLogix5000, RSLinx, and RSWho...and thus my question was a little vague. Ultimately, my goal is to remove from showing up in RSLogix. It looks like the post from "newpageboba" has some steps that I'll try. Glad to see that it wasn't a "dumb" Q in that the solution is nothing obvious. Will let you know how it goes.
  16. On Paul's first option (implicit messaging) it is recommended that the switch(es) in the network be managed with IGMP Snooping enabled, to filter the multicasts.
  17. RSLogix5000 New Version (V18)

    Thanks Ken. I share your concern as well on the switches.
  18. Rockwell has released V18 of RSLogix 5000. A brochure says that it now does I/O Messaging (implicit messaging), via "Unicast". I guess this would eliminate the need for an IGMP Snooping enabled managed switch (which filters multicasts, which is how implicit messaging currently works). I have done a fairly decent net search, and can not find any additional information on this. Does anyone out there have any details?
  19. I've got a pretty obscure one! I have a client interested in moving away from a Hunkar DAC-V molding machine (due to price and lack of support). He wants to re-create the functionality of the machine in an A-B Logix PLC. I have all the details on the signals to be processed, and those are not a problem. But short of someone sitting down and figuring out the "functionality" of the machine and recreating it in RSLogix 5000 (which I feel would be a big task)...I wanted to check to see if there were any toolkits, routines, code, etc. with RA/A-B that might exist out there. As I said, this querey is probably a one in a million shot but I thought I'd ask (I didn't see anything after a quick search on Rockwells website). Thanks to anyone out there who can help or has a suggestion.
  20. You can check out http://www.opto22.com/site/pr_details.aspx...item=SNAP-PACLC
  21. PLC Brand Name USA Market Share

    "Dick Morley", actually, not Chris Morley. Dick and Modicon (Schneider Electric) credits themselves with the invention of the first PLC...the Model 084 (84th attempt).
  22. Allen Bradley EthernetIP specifics

    Perhaps you can try ODVA (www.odva.org). The full EIP specification is available there, but for purchase. They are supposedly vendor neutral so their documentation may have the vendor-neutral information you're looking for. FYI, FORM 1770 from Opto 22 (www.opto22.com), may be useful to you...though it specifically addresses EIP class accessability as related to using Opto SNAP I/O attributes over EIP.
  23. Compact Logix

    You may want to contact a company called Monico, in Texas. http://www.monicoinc.com. Person to talk to is Doyle Taylor. Monico is in the business of devices that interface control systems to CAT engines, and I know we had discussed J1939 back in 2007. They may have implemented that into the Opto SNAP-PAC-S1. If so, you're in luck on the A-B side, as that can share data over EtherNet/IP with ControlLogix.
  24. B&R

    I'm looking for any opinions on Strengths and Weaknesses of B&R PLCs (X20, System 2003 & System 2005). I've read the existing posts, which are good, but slightly old. Any opinions out there? Anecdotal/specific points O.K. Thanks.