wonderboutin

Tanks but I find my error. Is the node adress. A DRT2-AD04 take 4 node. DRM21 = node 00 DRT2-AD04 = node 01 DRT2-AD04 = node 05 DRT2-ROS16 = node 09

I am new in the world of Devicenet.I bought a master card Omron CS1W-DRM21 and 3 DRT2 modules. I want to know if the master card and module are plug and play or if I do absolutely use software such as CX-INTEGRATOR. I configure my card in the I / O TABLE with CX-PROGRAMER and everything is connected, but I have the alarm HC and E2. DRM21 = node 00 DRT2-AD04 = node 01 DRT2-AD04 = node 02 DRT2-ROS16 = node 03

I have Omron PLCs with a OPC server link. I want to create a Web page that displays continuous values of the PLC. I work with Rsview SE but it is not an option available in this software. I need an example, or the name of a software for make this page. Thank you!

I have many NumericInput and I want to make a calcul with all NumericInput. I try a "FOR NEXT" loop to make the calcul but is do not works. Dim I, Total as Integer For I = 1 to 250 Total = Total + Data(I).Value Next I The name of my NumericInpit is Data1, Data2, Data3....... I have a error with this sub. Can you help me ?

I have a NumericInput in a display and I want to use in VBA. ex: dim data as integer data = Me.NumericInput1.value data = data * 123 - 2 This VBA is work but I want to use the NumericInput1 of a other display. Can you help me ?

I have the same problem. I do not have ActiveX control. I upgrade my Internet Explorer for the version 7 and the web browser Activex appear on the list.

I have the command "AlarmLogRemark Reset Data of the tag : #1 ($#1$)" #1 is a tag $#1$ is the value of the tag but I need the description of a tag

I want to transfert the description of a Tag in a string tag with a button.

Tanks! But I realy want to connect with VBA of Rsview I can connect with VBA from Excel but in VBA of Rsview, I have the error "User-defined type not defined" on the command "Dim connect As New ADODB.Connection.

I use Rsview SE with SQL. I want to connect with my database but I can't use a datalog model because, my database is not on the same format. Is not compatible. I want to connect whit my sql database in VBA. Can you help me ?

I have a master (5/05) with 14 slaves (5/03). The master comm with DF1 polling mode. I have a instruction "MSG". The communication is good but after a few minutes, I lost the communication. The led RS232 on the CPU don't flash. I put the CPU on prog mode and Run mode and the communication go on. Can you help me ?

I can't commnunicate with my slc 5/05 via ethernet I use the cmd ping 10.10.XXX.XX without result I use the cmd arp /a and I see the ip address and the MAC address but I can't ping my PLC. Can you help me ?

I have 2 cs1 with eternet card. I Want to excange data betwween my 2 plc. D0-D100(CS1-1)----->(CS1-2) and D200-D300(CS1-2)----->(CS1-1) Is it possible ? Do you have a exemple ? Tanks!

I have a application with a 5/04 and 15 5/03. My 5/04 communicate with all 5/03 in DF1 protocol. I use MSG instruction for read and write all data in all 5/03. I change my 5/04 for a 5/05 because I need ethernet port. When I Verify the project, I have the error "MSG instruction is not valid on the currently selected processor!-> 1747-L553B/C .................." Is it normal ? What can I do for communicate with all 5/03 ?

tanks. I configure with rs-232.