Asari

riyazahmad, Are you open two windows of CX? If doing so, as I know CX do not allow to connect another windows on line for the same port, just only one window at the time for the same port. So off line the first windows then go online for the other.

Go to this site http://www.eaton.com/EatonCom/Markets/Elec...ntrol/index.htm All information you need is downloadable including the HMI software. Ari

The site suppose www.samsungautomation.co.kr but it blocked by so many popup Samsung PLC device was acquired by Rockwell see at this site www.rockwellautomation.co.kr I'm trying to attach the manual book of FARA N700 but could not get it (14MB)

To do programming you must have (at least) T Series Handy Programmer or T-Program Development System. Go to this site http://www.toshiba.com/ind/downloads_main.jsp you may learn a lot. Mangga Kasep Cing Junun Ari

Crossbow, Thank you for your suggestion, then I'll change with FX1N. But the question standstill do anyone have the manual book at least pin out of programming connector for this PM-60. I'll try to access the aplication program and convert them to FX. Regards, Ari

Dear all, According to this site http://www.lighthouseplcs.com/plcs/mitsubishi.html#obsolete the product was discontinued and the nearest replacement is FX0N-60MR which is obsolete too (replaced by Shihlin AXon-60MR). BTW here is the PM-60M picture. Regards, Ari

Dear Friends, I got used printing machine that going to be recondition, everything which needed is there except the language and character is Japanese which I don't understand at all. The machine is controlled by Mitsubishi PLC type PM 60MR. I have been searching over internet but can not find the manual book. Could anyone help me to have the manual book in English and which software should be used. Thank you for your help Regards, Ari

Thanks for your help Yair Ari

Does anyone have manual instructin for E5CW temperature control, I have search at OMRON website just got Japaneese language. thank for your help Ari

Here is the link to that topic http://forums.mrplc.com/index.php?showtopic...&st=0entry303 Good luck

Hi All, I'm new to FUJI PLC, here on my table are NB series (NB2U56R-11) and Flex Software. I'm trying to write the programs but I can't see whether my program run or not. What should I provide for connecting my computer with PLC, does anyone has the manual for that type of PLC. Thank you for your kind help. Regards, Ary

Visit this site http://www.plcman.co.uk/page6.html Then make your own communication cable (SC - 9) described in this forum Good Luck Arie

I've downloaded and tried to upgrade CX-Programmer v2.03 and CX-Server v1.53 it’s succeeded. When you asked to fill in the license number box, fulfill it by old version license no. CX-Programmer ver.3.0 CX-Server ver. 17.1 Ari

Hi all, It might be useful for you; there is some software from Samsung that already collaborated with Rockwell automation. Here is the link http://www.samsungelectronics.com/factory_...6331_index.html Regards, Ary

Thank you It's working. Regards, Ary