jhoshaan

MrPLC Member
  • Content count

    8
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jhoshaan

  • Rank
    Newbie

Profile Information

  • Country Indonesia
  1. Remote Scanner 1747-SN

    Great thanks for your advice! In RSlogix, after I open the setting for the scanner, there I also see M0 and M1, what's the function of M0 and M1 in relation to scanner? Jho Shaan Learning is to know, To know is learning more
  2. Remote Scanner 1747-SN

    Another question: If we don't know the plc configuration regarding the scanner and the manual book of the m/c also gone already, how will we know the configuration of the scanner and remote I/O beside of using RS Logix? And If one of the remote I/O gone already (broken), how do we change, do we have to off all the plc or can we just change it in run mode. Need your advice Jho Shaan Learning is to know, To know is learning more
  3. Remote Scanner 1747-SN

    We're talking about scanner not a missle .... just joking. BTW, a ton thanks for you whom provided information. Jho Shaan Learning is to know, To know is learning more.
  4. Remote Scanner 1747-SN

    Great thanks Scanner and remote I/O only connected by 3 wires (tell me if I am wrong). How will the controller recognize if there are input or output of the remote I/O which ON or OFF together? Need your advice please! Jho Shaan Learning is to know, To know is learning more
  5. Remote Scanner 1747-SN

    After set the dip-switch of the remote I/O, will controller automatically recognize all the remote I/O or do we have to enable it by programming. And is there any correlation between this I/O and status file S2:11 - S2:12? Thanks
  6. Remote Scanner 1747-SN

    Thank you for your time and advice. I have another question: How we verify that the existing program at PLC is the same with the one in our PC. (Just say there are 3 files and I don't know which one is the latest one) Please give advice Thank you
  7. Remote Scanner 1747-SN

    Thank you for the explanation. Below is the I/O that connected to the scanner 1791-8 BC ------ 8 units connected to the scanner 1791- 16 BC ---- 8 units connected to the scanner and there's another analog/digital converter that connected to the scanner So, how to set the address of each I/O and how to set the dip-switch Please give advice!!! Thank you
  8. Hi all, I,m just new to this PLC and I want to learn more. In our side we use Allen Bradley SLC 5/03 and my question is how to address the remote I/O scanner and how to set the dip-switch at the remote I/O. Please help me .... Thanks