PMCR
MrPLC Admin-
Content count
701 -
Joined
-
Last visited
Files posted by PMCR
-
NX NJ Moving Variable Data with removable media on NA HMI
By PMCR in HMI Sample Code
This document, and the accompanying Sysmac Studio sample project, are intended to provide a method of moving the values of a variable (typically a structured variable, built using a custom data type) from one machine to another machine with the same variable and data type. Machine setup parameters, initial factory default values, or similar parameters would be typical examples when this type of function would be used.
This is accomplished using removable media (USB Drive or SD Card) attached to an NA HMI. The variable data is saved on the removable media on ‘Machine A’. The media is ejected from ‘Machine A’ and moved to the NA HMI on ‘Machine B’. The data is then loaded into the variable on ‘Machine B’, completing the process. An externally mounted USB extension cable / jack allows this operation to be performed without the need to open any control cabinets.
164 downloads
Submitted
-
CP1 Modbus TCP Peer to Peer
By PMCR in PLC Sample Code
This solution solves Modbus TCP Peer to Peer applications for CP1H / CP1L PLCs with CP1W-MODTCP61 adapter modules
230 downloads
Submitted
-
CJ to CompactLogix Implicit Messaging
By PMCR in PLC Sample Code
This document shows the steps to create an Implicit Message connection between a CompactLogix or ControlLogix processor, and an Omron PLC on Ethernet/IP.
199 downloads
Submitted
-
NX or NJ Data Logging Function Block
This function block allows users to log data to a .csv file on the SD card of an NX or NJ CPU
665 downloads
Submitted
-
NX or NJ Variable Historian
This sample code creates a variable historian.
It was originally created for a customer who wanted to log data at different intervals for different variables, and in some cases, only on change of state.
It essentially can be used to write event data to a .csv file.
360 downloads
Submitted
-
Submitted
-
EtherNet/IP Error Code Decoder
By PMCR in Tech and Application Notes
EtherNet/IP Error codes definition
Troubleshooting steps for Sysmac Studio and the Network Configurator for EtherNet/IP
85 downloads
Submitted
-
IR DR Monitor
This is a utility that can monitor IR and DR values and show what addresses they point to not just the raw value. FinsGateway is necessary for online use.
There is also a conversion tool to convert from PLC addressing to IR addressing and back again. /nana.gif style=vertical-align:middle emoid= border=0 alt=nana.gif />
992 downloads
Updated
-
SuperMon 5.65
Serial Communications tool. Includes a Modbus RTU Master with a Modbus Command Wizard to help build commands and understand responses.
5318 downloads
Updated
-
PMCR Reference.zip
By PMCR in Tutorials and Quickstarts
My Cheat Sheets / Quick Reference for PMCR
1751 downloads
Updated
-
PMCR Download Utility
Modified version of the Protocol Macro Transfer Utility that only allows Downloading of Protocol Macros to CS1 / CJ1 SCU/SCB modules.
If there is a password on the SCU / SCB it is ignored allowing the user to download to an SCU / SCB that is password protected. The Upload feature is disabled in this version.
2105 downloads
Updated
-
How to use the Data Trace function on Omron CS / CJ / CP PLCs
By PMCR in Tech and Application Notes
Tech Note that describes how to configure launch and read a PLC Data Trace.
2012 downloads
Updated
-
200DMReadTimeTest
Utility to time how long it takes to read 200 consecutive DMs out of an Omron CS1 / CJ1 / CP1H /CP1L PLC.
The utility loops 100 times (reading 200 DMs each time) and shows the total time and average for each read.
This utility supports both Toolbus and CV Mode Hostlink protocols.
It supports COM1 - COM16 up to 115200 baud.
It does not support Auto Baud Rate Detect for Toolbus.
810 downloads
Updated
-
FINS ActiveX Ethernet Control
Free ActiveX Control for Omron CS1, CJ1, CJ2, CP1H, CP1L, CP1E PLCs using FINS Ethernet.
This is an updated version of the same from 2 years ago.
3720 downloads
Updated
-
Updated
-
Updated
-
Updated
-
How to use the updated Data Trace function in CX Programmer Version 8.
By PMCR in Tech and Application Notes
Update to previous tech note on the Omron Data Trace tool. This is centered around CX One Version 3.0 (CX Programmer V8) and includes CJ2 specific functions of Data Trace.
1257 downloads
Updated
-
Updated
-
NS Series Programmable Touchscreens System Version 8.10
By PMCR in HMI Sample Code
Firmware version 8.10 for NS.
Includes 'new' ladder monitor web server Tag access for CJ2.
7142 downloads
Updated
-
Omron C series PLC Modem Communications Manual v3.zip
By PMCR in Tech and Application Notes
Modem communications guide for Omron PLCs V3
1943 downloads
Updated
-
Updated
-
NSFirmware8.21.zip
By PMCR in HMI Sample Code
Firmware 8.21 (release version) for NS Series HMI
3556 downloads
Submitted
-
Easy to use Modbus RTU Master for CP1L CP1H CJ1 CJ2 CS1
By PMCR in PLC Sample Code
This application is a ready to use Modbus RTU master for CP1L, CP1H, CJ1, CJ2, and CS1.
The user creates 'tables' of items to read and write. The ladder code automatically performs the communications as setup by the user.
The CJ1 / CJ2 / CS1 solution requires the use of a Protocol Macro on an SCU31 / SCU41 module, and the CP1L / CP1H function uses the Serial Gateway function of the CP1H / CP1L on a CP1W-CIF11 or CIF12.
Sample NS screens are provided with an Omron 3G3JX inverter as an example Modbus RTU slave.
Updated 1/7/2011 to include 3G3MX2 screen for NS, and to include CJ1W-SCU22,32,42 in documentation.
Updated 9/19/2012 to support 2 ports on an SCU card (CS, CJ1, CJ2) or 2 ports on a CP1L / CP1H.
21545 downloads
Updated
-
W465-E1-03 CS and CJ EIP21 Operations Manual.pdf
Ethernet/IP operations manual for CS1 / CJ1 / CJ2 Ethernet/IP modules
2519 downloads
Submitted