klauricella

I have a GT2510-VTBD and trying to get the mail working. I am a little confused on setting up the SMTP server was wondering if any one has done this yet. Thanks Kevin

I have been asked to network up to 5 DL340 plcs and a couple C-More HMIs. The customer has existing equipment (compressors and refrigeration) that they want to network for setting adjustment and status overview. Is best way to use DirectNet and set up one plc as master. I am not real familiar with Automation Direct plc or networking options so looking for the simplest and cleanest solution. I do have to add one plc so the master doesn't have to be a DL340. Thanks Kevin

I am fairly new to Mitsubishi and starting up a new project. This is first time that I am trying to get online with a L02CPU PLC with my laptop that is running 64bit windows 7. When I try to go online it reconizes a device but will not load the usb driver. Is the driver hidden on the install disk someplace, I looked on the website but there is not one for the unit. Thanks Kevin

So you can just foward the the PLC to a port and connect thru the internet using GXWorks2. We have tried this and have not been able to get it to work. Even in GXWorks it does not give an option to do this. Thanks Kevin

I have a GT25 connected to a FX3G with a FX3U-ENET-ADP ethernet adapter. Have everything working including the VNC for the GT25. Know we would like to connect to the GT25 thru the internet and passthru to the FX3G. Does anyone know if this is even possible spent a bunch of time yesterday but with no luck. We can connect to the GT25 via USB and connect to the FX but not thru ethernet. Thanks Kevin

We do not need to go thru the GOT but unable to see how you can go directly to the FX thru the internet.

This works but I am trying to go across the internet and connect to FX thru GOT Thanks Kevin

Just added a C-More touchscreen to existing system and need to change timer values from screen and haven't had much luck. I have tried using the R and TCA value but neither seem to work. I do have it set as a BCD 16 word., I have found on other forums to use the V memory but it doesn't allow me to add that. The timers I am using are T650-T657. Thanks Kevin

I have a DL350 plc that is connected to a C-More hmi thru port 1. I need to connect to a GS2 drive thru port 2 using modbus. What is the best way to do this and still be able to get online with pc. Thanks Kevin

I am having problems saving programs with GXWorks2. This has been going on since last summer and I have contacted Mitsubishi support but have not gotten an answer. I have a 64bit laptop running Windows 7. The GXWorks is version 1.91 but this is also happening on another laptop and that has 1.499. When I go to save as single file format the attached message pops up. Thanks Kevin

Thanks alot never would have found that. Kevin

1.No 2.No 3.Only been saving as single file format, where would you set the project and workspace names 4. Just tried and it came up with the same error. I can send the program to you if that would help nothing special about it. Thanks Kevin

Not sure what most of that stuff means and have yet to talk to anyone that does. Mitsubishi has seen this fault had has offered no suggestion. I am not a big Mitsubishi guy and have only started using it resonantly. Used to AB and Omron. Thanks Kevin

Ignore the last one had a different program open but everything is pretty much the same.

I have a MR-J3 servo that I am trying to change the acc/dec. I realize that I have to set the parameters but I am a little confused on what the code number needs to be. It shows an example of how to change the jog speed in the manual. The code number is 820CH I figure the C is hex for PC12 but where does the 8200 come from. Thanks Kevin

That is it Thanks. With my computer it was actual C:\Program Files (x86)\MELSOFT\Easysocket\USBDrivers Kevin

Has anyone tried to control a Yaskawa AC drive with Mechatrolink. I have a CP1H with a NCF71 controlling a couple servo would also like to control some V1000 drives just have not been able to find any info. Thanks Kevin

I tried all that and the servos connect with no problem. The NCF card does see them but shows a conflict. Any other ideas. I did hear from Yaskawa that this has been done before. Thanks Kevin

I have currently setup two E1061 hmi with remote access and it works fine, just wondering if anyone has had luck using a smartphone to monitor. I have tried my Blackberry Storm and an I-Touch with no luck. Was not sure if there is a VNC viewer available for them. Thanks

I have remote access working fine with PC but I want to use my Blackberry to see screen. Has anyone actually done this, if so what VNC viewer did you use.

Thanks that was it updated to 8.10 and it just works. So much for reading the manual.

I am trying to setup NS Web Interface but can not connect. I am able to upload and download thru my network so comms are good. Do I have to create my own html pages or should they be on the card. If I do have to create them are there any samples kicking around. The manual makes it sound like they already exist. Thanks

Yes to the manual model is a NS8-TV01B-V2 with version 8 and using explorer v7. I have FTP option set. I have tried with crossover cable and thru hub. I am able to connect with ftp command over network. I only get that Internet Explorer cannot display webpage. I am using a 2GB memory card (not Omron) that I had laying around not sure what it was used for before.