-
Content count
1834 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by Mickey
-
1747-UIC DB9 Pinout colours
Mickey replied to lost_in_space's topic in Allen Bradley / Rockwell Automation
You will be happy with the results. -
1747-UIC DB9 Pinout colours
Mickey replied to lost_in_space's topic in Allen Bradley / Rockwell Automation
Contact supplier.. https://www.plccable.com/contact-about-us/ -
0-10V output drops when connected to Micrologix 1400
Mickey replied to BigSteve's topic in Allen Bradley / Rockwell Automation
You're welcome -
0-10V output drops when connected to Micrologix 1400
Mickey replied to BigSteve's topic in Allen Bradley / Rockwell Automation
Double check input selection dip switch, default is current. See PDF dipswitch.pdf -
0-10V output drops when connected to Micrologix 1400
Mickey replied to BigSteve's topic in Allen Bradley / Rockwell Automation
Can you provide the complete catalog number of your Omega transmitter. And the Analog card. 10volts to power a transmitter is very unusual. And where is the 10 volts coming from on the PLC side? -
sine wave generation for frequency tests purpose
Mickey replied to ILC_H's topic in Allen Bradley / Rockwell Automation
Actually that's a symptom of the other pandemic we are having. -
sine wave generation for frequency tests purpose
Mickey replied to ILC_H's topic in Allen Bradley / Rockwell Automation
Another option.... http://www.plctalk.net/qanda/showthread.php?t=59426&highlight=sin+wave -
You're welcome
-
Here.... LINE3.pdf LINE4.pdf PALLET1.pdf PALLET2WET.pdf LINE1AN2.pdf
-
HMMM? Have you tried removing the .abc part?
-
Do you have RSLogix500? Version should not matter. What software do you have? FYI the free version will only work with a ML1100 and a ML1000 program. What kind of error are you getting when you try to open it? Post the file here and someone can create a pdf file of the program for you.
-
Here... GTG2_02RIGHT.pdf
-
Allen-Bradley PLC-5 communication setup with comm control card
Mickey replied to acpi's topic in Allen Bradley / Rockwell Automation
See above from the master cts_user -
PLC5 maximum of four timers acc strategy.
Mickey replied to gromit's topic in Allen Bradley / Rockwell Automation
What works is most important. And easy enough to understand. -
PLC5 maximum of four timers acc strategy.
Mickey replied to gromit's topic in Allen Bradley / Rockwell Automation
Sort (SRT) instruction will do that for you. Or sample ladder See pdf(s) sort.pdf HIVALUE.pdf -
PLC5 floats to integers via modbus
Mickey replied to gromit's topic in Allen Bradley / Rockwell Automation
See link.. http://www.plctalk.net/qanda/showthread.php?t=21916 -
Crossreference..... INV TO PDF_crossref.pdf
-
Here.... INV TO PDF.pdf
-
Trouble with getting online and uploading program from Compactlogix L31
Mickey replied to darwil93's topic in Allen Bradley / Rockwell Automation
Good to hear you solved your problem. I did see the other forum's responses also, great minds think alike. -
Trouble with getting online and uploading program from Compactlogix L31
Mickey replied to darwil93's topic in Allen Bradley / Rockwell Automation
Was there anything connected to channel 1 ? The port may not be configured for DF1 protocol. Do you have the offline file to check how the port is configured? -
Trouble with getting online and uploading program from Compactlogix L31
Mickey replied to darwil93's topic in Allen Bradley / Rockwell Automation
No, but double check the pin-out 2 to 3 3 to 2 5 to 5 -
Trouble with getting online and uploading program from Compactlogix L31
Mickey replied to darwil93's topic in Allen Bradley / Rockwell Automation
First, not all USB to serial adapters work. Second, not all USB to serial adapters support "Autoconfigure" You might try configuring the driver DF1 in Rslinx's manually. Default for your controller's channel 1 is.. DF1 full-Duplex Baud rate 19.2 kbps Parity none Station 0 No handshaking Error BCC Data bits 8 stop 1 -
HMI G3 not working using Crimson 2.0
Mickey replied to DBOVF's topic in Allen Bradley / Rockwell Automation
A ML1500 does not support Ethernet. Is there an adapter in between the HMI and the ML1500? -
function generator or polynomial block in PLC5
Mickey replied to gromit's topic in Allen Bradley / Rockwell Automation
Yup -
function generator or polynomial block in PLC5
Mickey replied to gromit's topic in Allen Bradley / Rockwell Automation
See link.. It is an online curve software to generate a formula for you. Then just use a compute instruction. https://mycurvefit.com/