luis137

THANK YOU SO MUCH, AGAIN AND I WILL DO

thks so much!! now im using one SCU an 1 SCB but a have problem with the direction of the SCU wen i put in the instruction PMCR #61E1 or #62E1 in the firts word of control, the port 1 of the SCU is working too. i don't know why? what can be wrong with the direction mode?

hi every how put in the control word_1 of the funcion PMCR, for the port of the CPU. in the board is #XXE1, or is from the Rs-232 port of the CPU

thks!... so I will make that configuration

Hi every body can somebody confirm to me if is possible comuncate a NT11-SF121B-EV1 with the SCU21-V1 using only one adapter RS-422 adapter (CJ1W-CIF11) for the serial module SCU21-V1, CPU <==> SCU21-V1 <==> CJ1W-CIF11 <==> NT11-SF121B-EV1 In the RS-232 RS-422 rack com com this can be possible??... thks.. Luis137

Hey Michael Thks so much!! that resolve the problem thks Luis

im set the settings but i still without receive data from serial module. the BCR, i conect in continuos read so this is ever sending data. but i dont know how to read this attached is the config. of the PLC im used test_BCR.cxp

ok!! i confirm the versin and is ok, but im try to start with a test between SCU21-V1 and PC(hiper terminal) and i dont see any responce of the serial module. i make the wire of comunication. PLC PC 2 TX----RX 3 3 RX--- TX 2 9 SG---SG 5 in the PLC i put a jumper between 4,5 (RS and CS) and PC jump 4-6 and jump 7-8. and about how introduce the parameter for the serial module i put it though sofware switches. i dont know what im missing....

hello everybody i have a question about how can read and work with the data of a BCR, im new in this, i dont know very well were is the information. i have a CJ1G-CPU44H with a CJ1W-SCU21-V1 i supose to read the data from RS-232 with the funcion RXDU, but the cx-programmer dont have this option i have cx-programer 4.0 (or maybe i dont find the opcion) and some body know how control the trigger, for only read when i want!! regards Luis137

ok!! dude!! thks a lot!!

i use the Q06CPU & I HAVE M0-8191 THE QUESTION IS IF A HAVE A GROUP OF M, LIKE A M2000 TO M2099 I CAN USE THIS GROUP LIKE A WORD I MAKE OPERATIONS WITH WORDS?

this part is only to know if you have a sucesful comunication with the CPU. and for this code the net mudule is conected in the 4th slot. whit 23 modules ok so you can use for less modules. cc_link_sample.zip

EXCUSE ME, SOME BODY CAN HELP ME WHIT THE I-O ASSIGNMENT OF THE INVERTER WITH CC-LINK MODULE FR-A7NC, I THINK IS SOME LIKE THIS: FOR THE FIRST STATION IF I USE ONLY INVERTERS X1000 Y1000 X1001 Y1001 X1002 Y1002 X1003 Y1003 . . . . . . . . X101F Y101F BUT SOME BODY TELL ME IS WRONG, PLEASE HELP ME!!!