s7xp.com

Propably a Step 7 version difference. I had a few years ago the same problems.

With version of medoc you have. DOS, 1.64 or 2.30

Using the network transfer. Be sure the PC are in the same workgroup, then it is no problem to move the license key.

Or WinPLC Analyser from MJH Software http://www.mhj-software.com/de/ Regards,

Check the siemens examples installed with the scl program. regards

Great stuff. Very very very fast. I have one on my desk for testing purposes. 100MB ethernet. Fully step 7 compatible. Try it, forget S.... See: www.speed7.com

Normally a 405 CPU is fast. What protocol is used and type of terminal. Check the ligths on the CPU. Rx Tx. The ligth are unfortunately for all the three comm ports, so if more connected to the cpu disconeect it if possible. If you see receives and no transmits there is something wrong. Simple check.

You need to use an area pointer for this kind of operations. Check the manual for area pointers and one of them is to control the screen number.

You do not understand chinese?

Smart, posting the same issue twice. http://forums.mrplc.com/index.php?showtopic=11386

I think mitsubishi must supply the gsd file. Otherwise try to google the product part number. Logics to ontrol the drive are not available from the internet. You need to read which control words/bits needs to be written in the drive to start/ramp. Propably the drive needs some configuration too.

Version 1.1 (?). I started in 1996 with PLCDirect PLC's but already with version 2. I think you need to upgrade to at least version 4.

Copy the entire data block in simatic manager or with the copy/paste functionality of windows. Select all the rows, copy and paste it in a new db.

But, always check to log file for problems or changes. Some functions (Area Pointers) are changed !!

Converting to wincc flexible 2005 id possible. From wincc, the user may open a protool project. It will be automatically converted (takes some time). After conversion check the log file because not all functionality is from protool is available or different in wincc.