ramaslabas

MrPLC Member
  • Content count

    43
  • Joined

  • Last visited

Community Reputation

1 Neutral

About ramaslabas

  • Rank
    Moose
  • Birthday 04/07/66

Contact Methods

  • MSN no
  • Yahoo ramaslabas@gmail.com
  • Skype ramaslabas

Profile Information

  • Gender Male
  • Location Kaunas
  • Country Lithuania
  • Interests Travel

Recent Profile Visitors

1933 profile views
  1. MOV multiple data

    Thank you Chelton. You saved a lot of my time.  
  2. MOV multiple data

    Hello, Making program on CP1L-E, is it any better idea, then MOV DXXX to DYYY if i need to transfer more then one simultaneously   (at this sample i change speed on transporters (16 of them) according product is on) Dxxx.bmp
  3. Hardware problem S7-224

    Could be... If I will get any results, I will inform.. Thanx
  4. Hardware problem S7-224

    Still silence All the day I tried wipeout.. This program do not recognise any PLC conected
  5. Hardware problem S7-224

    Hi colleagues, I have problem occurred with 224 PLC. I installed it on machine and sent simple program to start check of system. Program consists of Main program, one subroutine to enable 2 outputs blinking using SM0.5. Then happened following sequence of events. 1.Before download there was pop up that PLC in program differs to PLC connected. 2.I pressed button to change PLC in program. 3.Than download…Downloaded… 4.Than another pop up appeared, it was very shortly – hardware frame problem (or something like this) and system needs to close communication.System halted. 5.Yellow LED was on.It is impossible to connect. 6.With switch run/stop depressed to run.It started. Outputs blinking. 7.Impossible to connect. It looks that program and hardware have different versions. Before this case I was working with older PLC. It can be that PLC software version 1.x was entered. Have somebody have similar situation with successful decision? I never used wipeout program. What is sequence to execute it. Do this DOS program works with USB? I use PC/PPI cable connected to USB via USB/COM converter.This equipment I use more than 3 years without problems... Ramunas
  6. Laptop whit out serial port

    Problems from USB to COM can be caused by windows open your PC properties, hardware, device manager COM and LPT choose your port properties advaced REMOVE ENABLE from FIFO buffers If system is older make serial number COM1 This should help
  7. ounters and move instructions

    Thanks Dekor, This mistake I could recognise only on working project. I'm system integrator, sometimes a lot of hours looking at machine and thinking what to do with programing
  8. S7 300 analogue output problems

    Grounding only one side of cable shield. Sometimes it really works.
  9. reducing scan times

    Do not forget inform about results. I have downloaded your program. Surprised, that you have problems with scan time
  10. ounters and move instructions

    It depends of what siemens you use. I never used real time clock but it could be like this And, who knows how to set and read real tim in 200 series please help Project1.pdf
  11. Hi Pawel Usualy HAMA adapters are working. I work with it for Siemens, ESA HMI, Omron If they are not in Polish market - welcome to Lithuania Ramunas
  12. Difference between V and M memory

    There are different memory areas and you can use all of them. Even SM. They can be retentative V and M areas. In user manual is everything...
  13. Telemecanique Stuff

    Can You help me with soft to program TSX17. I have one project seems never be finished... Ramunas
  14. S5 Voltage selector

    S5 is suplied with impuls power suply unit. If it burned - look for varistors, there can be some transistors burned out.We have tried to repair one. It was problems in finding part, but may be you are more lucky.... By the way it could be that nothing hapened.
  15. VIPA CPU

    VIPA as I know is made by specialists left SIEMENS by some reason. Price level is similar. It should be some distributors in Sweden. You can ask my distributor www.elinta.lt