ramaslabas

Thank you Chelton. You saved a lot of my time.  

Hello, Making program on CP1L-E, is it any better idea, then MOV DXXX to DYYY if i need to transfer more then one simultaneously   (at this sample i change speed on transporters (16 of them) according product is on) Dxxx.bmp

Could be... If I will get any results, I will inform.. Thanx

Still silence All the day I tried wipeout.. This program do not recognise any PLC conected

Hi colleagues, I have problem occurred with 224 PLC. I installed it on machine and sent simple program to start check of system. Program consists of Main program, one subroutine to enable 2 outputs blinking using SM0.5. Then happened following sequence of events. 1.Before download there was pop up that PLC in program differs to PLC connected. 2.I pressed button to change PLC in program. 3.Than download…Downloaded… 4.Than another pop up appeared, it was very shortly – hardware frame problem (or something like this) and system needs to close communication.System halted. 5.Yellow LED was on.It is impossible to connect. 6.With switch run/stop depressed to run.It started. Outputs blinking. 7.Impossible to connect. It looks that program and hardware have different versions. Before this case I was working with older PLC. It can be that PLC software version 1.x was entered. Have somebody have similar situation with successful decision? I never used wipeout program. What is sequence to execute it. Do this DOS program works with USB? I use PC/PPI cable connected to USB via USB/COM converter.This equipment I use more than 3 years without problems... Ramunas

Problems from USB to COM can be caused by windows open your PC properties, hardware, device manager COM and LPT choose your port properties advaced REMOVE ENABLE from FIFO buffers If system is older make serial number COM1 This should help

Thanks Dekor, This mistake I could recognise only on working project. I'm system integrator, sometimes a lot of hours looking at machine and thinking what to do with programing

Grounding only one side of cable shield. Sometimes it really works.

Do not forget inform about results. I have downloaded your program. Surprised, that you have problems with scan time

It depends of what siemens you use. I never used real time clock but it could be like this And, who knows how to set and read real tim in 200 series please help Project1.pdf

Hi Pawel Usualy HAMA adapters are working. I work with it for Siemens, ESA HMI, Omron If they are not in Polish market - welcome to Lithuania Ramunas

There are different memory areas and you can use all of them. Even SM. They can be retentative V and M areas. In user manual is everything...

Can You help me with soft to program TSX17. I have one project seems never be finished... Ramunas

S5 is suplied with impuls power suply unit. If it burned - look for varistors, there can be some transistors burned out.We have tried to repair one. It was problems in finding part, but may be you are more lucky.... By the way it could be that nothing hapened.

VIPA as I know is made by specialists left SIEMENS by some reason. Price level is similar. It should be some distributors in Sweden. You can ask my distributor www.elinta.lt