drusso

MrPLC Member
  • Content count

    36
  • Joined

  • Last visited

Community Reputation

0 Neutral

About drusso

  • Rank
    Sparky

Profile Information

  • Country United States
  1. Ethernet and Power in 1 Connector

    The connector is module so it was multiple part numbers. 09140082733 - 8 pin female  09140082633 - 8 pin male 09140014721  - ethernet female end  09454001560 -  ethernet male end 09300100527 - hood      
  2. Ethernet and Power in 1 Connector

    I found the connector for the remote HMI panel we are installing. The company that manufactures them is Harting. The link is below. https://b2b.harting.com/ebusiness/en/industrial-connectors-han/1100382   Thanks, dave
  3. Looking to install an HMI with an E STOP in a Stainless steel enclosure mounted permanently The PLC is mounted to a portable machine that will be rolled away for maintenance. Looking for a quick disconnect with ethernet and a couple of pins we can use for 24vdc and an Estop. Has anybody found as clean solution using only1 connector?   thanks  
  4. Sparky, They only want the log out in "manual mode" if there is no screen activity, push buttons depressed or settings changed. The user can stay loged on in manual as long as he touches the screen before the time out of 15 minutes. thanks, dave
  5. Jeremy, The only issue is when an operator is using push buttons within the same screen. All screens have unique #'s. There is an "idle detect" active x for the SE version but not the ME version. thanks for the suggestion, dave
  6. We have a panelview plus 6 to a micrologix 1400. Looking to log off the user after 15 minutes if there is no screen activity but only if the machine is in manual mode. We have used the auto log out built into the panelview but this time we only want to log out the user if the machine is not in auto mode. Is there a pratical way to monitor the screen for touch without monitoring every pushbtton on every screen thru the plc code? thanks, dave
  7. Hi, We are trying to display the current selected recipe at a diiferent screen than where the recipe was selected. The Recipes are located at the hmi, not the plc. The tag needed to see the name of the current running recipe is what I need to display the recipe? thanks, Dave
  8. PV PLus add users

    Ken, The Panelview plus 1000 hmi is connected to a Micrologix 1400. The machine is going to be located at a remote location, as in India. The company purchasing the equipment does not want a simple 1 log in for all operators level and a second log in for manager level. They are looking to log who the person operating the machine is at any given moment. All about monitoring who is operating the machine for production output and any issues. They were looking for the ability for 20+ differnt operator names - passwords to be added and removed as needed. thanks for the quick reply, dave
  9. We are trying to add users using the pv plus 1000 screen. We have an admin user and want to have the ability to add lower level users only using the screen functions at the screen and not factory talk studio. Is this possible? thanks, dave
  10. control logix 32e

    we have the Eaton touch screen showing 128 for TTL The Control Logix is at 64 for TTL Is this going to cause network problems and how would I correct them. the control logix is showing the ethernet port is 100 full duplex thanks for the quick response dave
  11. we are using ethernet for the hmi to plc comms. the plc is a controllogix L32E. we are running version 19.1 firmware at the plc. the plc is set for 100 mbs. full duplex mode. when we ping the plc the ping shows TTL at 64. when we ping our Eaton HMI on the same network the ping shows TTL at 128. seems the plc is not running at full duplex. can somebody help or explain why the ping results are not the same? also how we can achieve the same ping results at the plc? thanks, dave
  12. We recently removed the following Square D PLC hardware from obsolete machines. 1 SQUARE D SY/MAX class 8030 ps-20 ser e power supply 120vac 128 i/o 4 SQUARE D SY/MAX class 8030 ps-41 ser a power supply 240 vac 45 watts 1 SQUARE D SY/MAX class 8030 DLM-120 processor 1 SQUARE D SY/MAX class 8020 scp-323 ser c processor 1 SQUARE D SY/MAX class 8020 scp-332 ser g1 processor 4 SQUARE D SY/MAX class 8020 scp-311 ser g processor model 300 16 SQUARE D SY/MAX class 8030 CIM-131 ser a 12-24 vac/vdc input modules 8 SQUARE D SY/MAX class 8030 CIM-101 ser a 120 vac/vdc input modules 7 SQUARE D SY/MAX class 8030 com-221 ser b 120 vac output module 16 SQUARE D SY/MAX class 8030 com-231 ser.b 240 vac output module 4 SQUARE D SY/MAX class 8030 CRK-200 ser.a I/O Rack Assembly 1 SQUARE D SY/MAX class 8030 RRK-100 rack assembly 1 SQUARE D SY/MAX class 8030 DRK-300 I/O rack assembly shipped from NJ I can accept paypal or a credit card No reasonable offer refused. Please email me at dave _r_07058@yahoo.com
  13. The following Allen Bradley PLC hardware was removed from obsolete equipment in 2009. I can accept paypal or a credit card. All items are in working condition. 30 day warranty, except on batteries in plc's and dataliners. QTY 1 Allen Bradley Cat# 2706-B21516 Dataliner DL 20 $ 100.00 QTY 19 Allen Bradley Cat# 1771-OA 120 VAC 8 Output Module $ 25.00 per unit QTY 2 Allen Bradley Cat# 1771-PA Ser.B Power Supply $ 200.00 per unit QTY 5 Allen Bradley Cat# 1772-LXP D 2/16 PLC With Power Supply $ 200.00 per unit QTY 3 Allen Bradley Cat#2706-B21J16 Dataliner DL 20 $ 100.00 per unit QTY 1 Allen Bradley CAT#2706-B23J16 Dataliner DL 20 $ 100.00 QTY 11 Allen Bradley Cat#1771-IBD 10-30 vdc Input Module $ 25.00 per unit QTY 5 Allen Bradley Cat#1771-OBD 10-60 vdc Output Modules $ 10.00 per unit QTY 5 Allen Bradley Cat#1771-OG TTL Output Modules $ 25.00 per unit QTY 5 Allen Bradley Cat#1771-IG 5V TTL Input Modules $ 25.00 per unit QTY 3 Allen Bradley Cat#1771-A4B 16 slot I/O Chassis $ 50.00 per unit QTY 1 Allen Bradley Cat#1772-LN2 PLC Mini_processor $ 50.00 QTY 1 Allen Bradley Cat#1771-IA 120vac 8 Input Module $ 10.00 Please email me at dave_r_07058@yahoo.com shipped from NJ
  14. We have recently removed Omron PLC equipment from obsolete equipment All items are in working condition. 30 day warranty. I can accept a credit card or paypal. Quantity 6 Omron C4K-OR2 Expansion Output Modules $ 25.00 each Quantity 2 Omron C16P Output Modules $ 50.00 each Quantity 10 Omron C28K-CDR-A Programmable Controllers $ 75.00 each Please email me at dave_r_07058@yahoo.com Shipped from NJ
  15. Ken, I appreciate your time in answering my question. We are trying to size the project $$ wise. We will try to make a test and use a single L63 processor that is used in another system. The $$ difference when adding more than 1 processor per system is large because we need to build up to 12 systems. Thanks, drusso