BobB
MrPLC Member-
Content count
2154 -
Joined
-
Last visited
Posts posted by BobB
-
-
Oh bugger - not too bad I trust.
-
How did you go?
-
The only way you will know what the problem is connect to the PLC and check the error log.
-
Inputs start at channel 0 - outputs start at channel 100 for that PLC. So inputs will be channels 0 & 1 - outputs will be channels 100 & 101. Inputs are orange and outputs are yellow - standard with Omron. Inputs are ID - outputs are OD. Hope that helps you sort out your issues. Yes - the first input card is part of the processor. That PLC was discontinued many years ago by the way.
-
Proecssor and what is in slots. Varies with processor.
-
I have not seen one of these for many a long year - thought they had all died. Memory is fading. Somewhere in the software there should be a MOV function I think to move the screen page number into the notify area then the screen will change to that page. Hope this helps. As the PT Control Area is D0000 do a search for that address - it should appear multiple times to change the page on the screen.
-
Nothing in my mail box.
-
Hi proud Kiwi I bet after the test result today LOL. Will not let me allocate SB13 or map to a PLC bit - HELP!!!!
-
Nope - FINS.
2 people like this -
Thank you - will give it a go.
-
I wish to use the alarm buzzer in an NS screen. I have not been able to find how to do what I want to do. There are about 200 alarms programmed into the screen from a PLC but I only require to use the buzzer for about 8 of them. The buzzer would also need to be muted. Any help appreciated.
-
This has been answered elsewhere - poster by a different name?
-
USB would be the best bet for mine. It should work easily.
-
Use MOVD.
-
-
Yes - there is TST and TSTn (test not).
-
There are several Omron drivers for Citect. OMFINS I think is an old one that is why I suggested you have a look at this one.
I could find them all easily on the old website - the Aveva website is a pain in the you know what!
-
Have you had look at this? https://softwaresupportsp.aveva.com/#/producthub/details?id=abe15288-1322-4707-e2a5-08d8f5e80cc6
I am over the Aveva website crap to be honest - the old website was much better and easier to navigata.
hope this helps.
-
-
First check the cable - pin 1 is negative and pin 2 is positive on the Omron side if I remember correctly.
-
It just means always on.
-
Here is a link to the Gautami font - download it and install in Windows on your laptop/computer. Similar for the bold form. https://fontzone.net/font-details/gautami
-
It could well be a firmware version issue. Check to see if there is a difference in the firmware with Omron. Easiest way would be to take a pic of the label and send to Omron.
-
I think I know where you are coming from. All numbers have to be converted to floating point before you can us them for floating point maths. Integers do not work. Use FLT or FLTL to do the conversion.
NS Recovery
in CX-Designer
Posted
Use an old camera to format it.