JCURIEL

MrPLC Member
  • Content count

    9
  • Joined

  • Last visited

Community Reputation

-1 Poor

About JCURIEL

  • Rank
    Newbie
  • Birthday 04/13/70

Contact Methods

  • Website URL http://
  • ICQ 0

Profile Information

  • Location Clinton, MA
  • Country United States

Recent Profile Visitors

1813 profile views
  1. Comparator Issue

    I agree 100%, but I wonder why the Equal to Contact goes true at only 50% of the Timer preset.
  2. Comparator Issue

  3. Comparator Issue

  4. Comparator Issue

    I Have a D3-340 CPU and I'm using a Equal to Contact instruction to be true when a Timer reaches 60 seconds. When the Equal to Contact Instruction goes true, the current value for a counter will be transferred to a Register Memory and will Reset the counter. What is happening is that the timer resets on 30 seconds; if I change the number in the Equal to Contact instruction (k6000) to K12000, it will reset when th timer reaches 60 seconds. Please find attached a Doc file with a print screen of the Ladder Logic. I already contacted Automation DIrect Technical Support, but they had the same results I have. Doc1.doc
  5. Channel 1 System: DH485 19200 Channel 0: DF1 Full Duplex 19200 none 1 Error Detection: CRC Is there any way to reset to factory settings?
  6. Good afternoon people, I have a PLC AB 5/03 and by mistake I shutdown the 485 port (Channel 0). Channel 1 was setup to work as RS232 but never could establish communication. Before I shutdown Channel 0 I was able to establish communication through this pory. I made a cable for Serial communication wiith the following array: 3==>2 2==>3 5==>5 Baud rate =19200 Parity = None Bits = 1 CRC Is there any way to establish communication back through Channel 0? Is there any way toreset the processor and be able to access any how? Thanks,
  7. CX-Server Lite

    Good morning everybody, I installed CX-server Lite on my laptop to get data from a CQM1 cpu42. All objects from more controls related to Omron could be insert on a spreadsheet except OMRON CX COMMUNICATIONS CONTROL. The error message from excel I received is: CANNOT INSERT OBJECT I have CX-one installed. CX-Server Lite ver 1.1 CX-Server ver 2.42 In the example that came with the software (cx-server lite) works the insertion of the OMRON CX COMMUNICATIONS CONTROL on any page. Thanks
  8. I need to connect a SLC 5/03 with a computer with Wonderware installed. The communication is using the RS232 port in both sides. Can I use the AB 1747-CP3? Thanks in advanced for the help.
  9. CONTROLLER LINK QUESTION

    THANKS A LOT DARIN. JORGE