MPM

MrPLC Member
  • Content count

    189
  • Joined

  • Last visited

Everything posted by MPM

  1. Hi guys, Just checked out the new sw V1.1 version from the new European NQ series HMI terminals. I found it on myomron.com It is much better and much more stable than earlier versions. They even added 2 portrait models to their portfolio for 5.7 ". Also they added a driver for a new line of PLC called CP1E.
  2. NTST on Windows XP

    There are special reg keys created for ntst 4.8 versions on w7. I think it was even on myomron.com. Omron hq staff in holland should be able to provide you. Regards, Mpm.
  3. NT2S-SF122B-EV2 firmware problem

    This is part of the installation sw of nt2st v1.3c which you already have else you can not program with. Nt2st. You will probably find this start programs, nt2st. Regards, Mpm
  4. NT2S-SF122B-EV2 firmware problem

    Hi, You were going correct. After the F1 + F6 on startup it erases the system. Next step is to start up the firmware upgrade tool of nt2st sw. Download the correct firmware of your unit. After this dowload the unit is " as from factory". Regards, MPM
  5. NT31 upload program to Support tools error

    can you send me your program so I can give it a try. which version of NTST do you have, 4.82 is the latest , and can be found in the utility folder of your CD one DVD. Maybe your version is too old. regards, MPM
  6. NT31 upload program to Support tools error

    Hi Version 3.2 / 3.21 are versions which can only be uploaded and downloaded from and into terminals. I know there is a special tool for that. You can not edit or do anything with it, just upload / download. You should contact your omron office. regards, MPM
  7. NQ Designer V2.0

    Yes it can. scu 21,22,31,32,41and 42 NTlink, Modbus, hostlink ( even multidrop) also just tested the ethernet models (new) and it can talk fins (Udp)to CJ, CP1 l/H/E ( cif41) regards, MPM
  8. NQ Designer V2.0

    Looks much improved, screen navigation has changed as well as the datalogging function.the ethernet models fit to cp1e /l/h on cif41 also the bigger alarm fonts are most welcome
  9. Converting NT600S to NS8

    Try step by step. Save first as *.know and go up model to model until you reach ev2 myst4.82 is the latest
  10. Hi, NT2ST is already obsolete for more than 6 years ( januari 2005) NTXS is indeed the next generation SW. In my opinion NTXS on your PC should work without a problem ( ON -EV2 units). Windows 2000 I have no idea but I am sure it is mentioned in the NTXS manual. There is no way to convert a HMI file to pzm as these are 2 different platforms. I would check in your application that you have used the default Hostlink settings and validate that node number programmed is also the PLC node number ( common mistake with NT2S) Cable you are using is NT2S-CN002 ?? Pinning is in the manual of NTXS. My Questions: How can I install NT2 ST on my laptop without having a floppy drive? Probably NT2ST V1.3C can still be downloaded ( I spotted it last time on OMRON US website) Is it possible to communicate with an EV1 or EV2 unit with NTXS on a machine running Windows 2000? EV1 units can not be used with NTXS ( pre 2005 production) Is it possible to revert to previous firmware on an EV2 unit? ON EV2 units , when you have used NTXS it is possible to revert back so you can use NT2ST again. (Press F1 and F6 (hold), power the unit. Memory will be allocated. then use the firmware upgrade tool for NT2ST and download the firmware for the specific model. Now the unit is "as of factory" My opinion your problem is the application created ( it is different from the NT2ST you are used too) regards, MPM.
  11. NQ Designer

    HI the word button does indeed do the job you need to do. Reference is the register you are writing too. Min / Max means that when the value of the register is in that area the specified tasjk will be performed. example : DM10 is the reference. value =0 ( min / max are both 0) task is to write 1 to DM10 value is 1 ( min / max are both 1) task is to write 2 to DM10 value is 2 ( min / max are both 2) task is to write 3 to DM10 value is 3 ( min / max are both 3) task is to write 4 to DM10 value is 4 ( min / max are both 4) task is to write 0 to DM10 so 5 states are needed. Each press of the button will make sure the task is executed. For info: the SW help should display this information. regards, MPM
  12. NS5 with ETN and time out Error

    Hi Guys, see the attachment. The connect except .... has been added by OMROn to solve this problem in case of a node was offline. If you set comm all with these settings should your pronblem rthen not be solved
  13. NS5 with ETN and time out Error

    Hi With the comms autoreturn setting you also have to change the 3 and 5 setting in comms screen to 1 and 0. when you click help on the comms creen this is explained very well. It is slow because it is still polling the missing PLC as you have not adjusted the time-out settings. regards, MPM
  14. NTXS with NT2S degree sign

    Hi If all is ok you can add characters in the font list, create your own character. regards.
  15. NT31C-V2 to NT31C-V1

    Hi There is a transfer utility tool avaialble at Omron. This tool allows you to upload applications and download it again in other terminals. I know it is called TUV1.82 or TU V2.0 I have no idea however if an application created for a V2 terminal will woirk in an Older V1. Check for this tool at your local Omron office. I do not have this tool. regards, MPM
  16. NS10 FIRMWARE UPGRADE

    Hi guys, Maybe some tips. www.MYOMRON.com , download section holds firmware to download up to 8.41 for NS. For format issues, I have struggled in the past also with this problem. Now If this happens I always tell the customer to use a CJ1 , place the CF card in there and format the card. This will make it usable for NS also. regards, MPM
  17. help plz.

    Hi Just tested your setup. Please make the following changes to make all work. PLC program as suggested by PDL, change to default ( Hostlink) Download the settings to CP1E Power cycle the PLC ( a MUST) Open application in NTXS V1.04. Download firmware Download application. Use NT2S-CN242V1 cable as suggested before. Setup is running perfect on my desk. regards, MPM
  18. help plz.

    Hi Musak, I do not have NTXS 1.04 on hand so hopefully can do the explanbation step by step. For NT2S to CP1E you would need to configure CP1E as standard Hostlink node 0. Cable to be used NT2S- CN242V1. This cable powers the Nt2S. Using NTXS make sure that the network created that PLC = node 0 , by default the NT2S is node 0 so please exchange the nodenumbers. Or make HL node on CP1E 1 , make sure they match. After changing comms settings in CP1E make sure you do a powercycle. Wednessday I am back in the office to check your programms , if needed. Regards, MPM
  19. NT31C SYSTEM TRANSFER PROBLEM

    Which model are you using? Which version of NTST? The application? where is it coming from? regards, MPM
  20. NT2S-SF122B-EV1

    Hi Kevin, No I do not but know they are stocked items at OMRON. It is a special connector attached. I know they also have this CIF which converts the CMOS output on CPM1 to DSUB If you use this CIF you can use the same cable as for CPM2. regards, MPM
  21. NT2S-SF122B-EV1

    HI Kevin, Just to clarify. NT2S-SF122B Connecting peripheral on CPM1 you need for NT2S-CN222-V2 or NT2S-CN225-V2 cables The drivers for CPM1A on this port are CMOS level and NOT RS232. If you connect now CPM2A, DSUB9 , you need NT2S-CN242-V1 cable Programming EV1 you need NT2ST programming SW. ( cable needed NT2S-CN002) Protocol is HL Standard settings. regards, MPM
  22. NT2S-SF122B-EV1

    HI All, I see there is some confusion / misunderstanding with reghards to EV1 and EV2. differences between EV1 and EV2 are design differences ( internal powersupply, used memory et) NT2S-Sf121-EV1 has same as connection possibilities as NT2S-SF121-EV2 this is same for all models ( SF122, 123, 125,126,127) Sf121 and Sf125 are powered by 24V. all others are powered by PLC. Despite the comments mentioned The experience is quiet strange regarding the breakdown of the NT2S which is powered by PLC. My information tells me these units are sold most and hardly ever break down. What I can imagine is that users create there own cables ( not use the OMRON ones) Using the wrong cables( with high resistive wires) you can expect a voltage drop or failures. Regarding the fuse of 500mA in the power circuit the max power will not do much, I believe 50mA is max current from serial port. Nt2S should , if my calculations are correct draw around 30mA NT2S-SF122 connected PLC you mean CPM1 ( NOT CP1M) this requires the cable NT2S-CN222-V2 or NT2S-CN225-V2. These V2 cables have low resistive powerlines to reduce voltage drop. regards, MPM
  23. NT2S-SF122B-EV1

    Hi, This very old HMI requires NT2ST SW. So do not use NTXS. The PC cable is called NT2S-CN002. The PLC cable depends on which PLC will be connected. regards, MPM
  24. Work bits does not exist

    Hi guys, Minor detail, since when does OMRON have workarea on Hostlink, Use NTlink where we have workarea and select coil address in NTXS. regards, MPM