PdL

MrPLC Admin
 View profile  See their activity

  • Content count

    3048

  • Joined

  • Last visited

Posts posted by PdL

  4. Posted

    Cable: http://forums.mrplc.com/index.php?/files/file/349-universal-cable-for-omron-9-pin-port/

    You will need to have a program (file extension is *.onw) or create one using NT Support Tool. You can download a copy here: (https://www.myomron.com/index.php?action=downloads register and look in /downloads/4.Products/Software/NT/NTST/)

    Press any two corners to enter the system menu on the NT31C and go to transmit mode, connect cable to screen and download.

     

     

  5. Posted

    I recently ran into the same installing CX-One 4.1, on a normal (non virtual) system. I manually installed the USB drivers from the installation disk and following ran CX-One installation again, now it was ok. No idea why it would hang on USB driver installation.

    Try searching for dpinst.exe on your CX-One disk, there are separate versions for different O/S but if you'll find the right one.

     

     

  8. Posted

    What do you mean by restart? What do you want to achieve, making a bit 1 can be done in several ways, by programming conditions or by forcing the bit. Reading your other post the question makes sense, I guess you mean to say by making a bit 1 instead of to make a bit 1. No there's not, you can always have a an output interrupt power using an ordinary hardwired timer for instance but that doesn't sound as a soluton merely a workaround.

  18. Posted

    If I understand correctly you want to use CX-Simulator to test TXD/RXD instructions? I have never done it, but according to the manual it should be possible. Not sure however if you can also test actual live equipment connected to the PC.

  21. Posted

    No conflict, just keep 1 program, and assign a unique IP to every NS8. Just don't forget when downloading to change the IP address at Comms setting... Make sure the node addres you set in comms setting matches the last octect of the IP address. And add set a routing table in the CPU that puts the ETN port on FINS network number 1. Only thing you need to think of, is if there can be any conflct for the operator.

  25. Posted

    I agree, CX-Supervisor is not a "mature" SCADA application and not stable enough in my opinion. The alternative in Omron would be NS-Runtime. As far as stability goes it performs much better. It however is not really a SCADA but more a HMI running on Windows. You can design it just like an HMI with CX-Designer and needs a runtime license key just as with CX-Supervisor. For any other alternatives, there are numerous SCADA around...