carolina
MrPLC Member-
Content count
14 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout carolina
-
Rank
Sparky
Contact Methods
- Website URL http://
Profile Information
- Country Spain
-
if you need communicate a ns with other vendors you have to buy GSW-S7 component
-
Somebody Know the reference of the NS12 backlight? or i have to send to omron service to fix?
-
with intouch by wonderware you can communicate with omron plc's if you installing the drivers for omron, that use a finsgateway program. also you can install the cx.server program from omron in your computer, you can create a project with all the tags, and after with dde server from wonder you can access to the comm with the tags.
-
only you have to check that the e5cn support compowayF protocol, you configure the e5cn in communication mode by compowayF, after you can configurate the portb of the ns5 for temperature control and after in the ns-designer settings > register host, you configurate the e5cn. and you can use the smart active part.
-
thanks I read and the ntxs and nt2s have a diferent firmware version, and this version are non-compatible.
-
You can read the data with dbread instruction for a associated point, and after you can graph the point with a tendence graph or a chart....
-
you have to configurate in the ns the conversion table of ethernet, you entry the ip and the port of the ns, and in the conversión table you entry the internet ip of the plc. I'm not sure but in the plc the udp port will be the same of the ns.
-
You have to view the pinout from the c200h and the epson print, you conect always the txd with rxd.
-
you can make a general macro "when the value change", like Andrey said you use the word $sw14 and when the condition for the time is OK you go to other screen. Only you have in the macro make the operations for find the time that you want.
-
Hello everybody I have a problem, i want to use the software ntxs, for a nt2s-sf126, but the program is in .hmi, from nt2st adn the ntxs don't open .hmi, only the .pzm file, i don't know how can i do for convert a program from nt2st to ntxs. And if i download the program from nt2st to nt, and after upload the program from nt to ntxs, the software show a error.
-
In the cx-integrator you can add to the network the k3hb and the cj1wdrm21. to know the channels in the plc that have the information of the k3hb, you first configurate the channel type in the k3hb, after in the cj1w-drm1 you register the k3hb and automatic you have the information of the channels in the cj
-
you have to review if the data is INT in all program or you are working with diferent data type, review in the symbols that all the data related with this are in the same format, because is probably that you have a math operation with other data in other format
-
You can use the finscommands to comunicate VB with the plc, or you can use cx-server lite, with this you only have to configurate the activex. With the cx-programmer you can read or write in the plc' memory if you are online in the memory menu or using ALT + 3, window.