JPV

MrPLC Member
  • Content count

    7
  • Joined

  • Last visited

Everything posted by JPV

  1. SEND via ethernet word from CP1L to NSJ

    Hi Pawel, As mentionned Sparky, CP1W-CIF41 does not support officially SEND/RECV/CMND commands. Even if it seems to works, we (I) do not have the detail of when It can work or not. But, I agree also with Sparky, using the NSJ to send/receive should works ! Do not forget to recycle the power of the CP1L with its CIF41 after writing a routing table and remind also that frame managed by the CIF41 should have a size less than 1024bytes. Hope this help. regards, JPV
  2. File Name: Multiway V7.4 File Submitter: JPV File Submitted: 16 Jan 2009 File Category: Utilities Free utility software for Omron PLC - Sysmac-Way serial - FINS serial Toolbus Ethernet UDP and TCP - Modbus RTU Master/Slave TCP Client/Server - ASCII Terminal and Modem fonctionnalities - Terminal for ASC02/11/21/31 Unit - Compoway/F - Frame Sniffer (need two RS232C ports) - Frame Booster (RS232C/Ethernet UDP) - OPC Client Just helping you in Omron integration <img src=style_emoticons/#EMO_DIR#/yes.gif style=vertical-align:middle emoid= border=0 alt=yes.gif /> . http://support-omron.fr/MultiwayE.php Click here to download this file
  3. Multiway V7.4

    Version Multiway Version 7,9

    2554 downloads

    Free utility software for Omron PLC - Sysmac-Way serial - FINS serial Toolbus Ethernet UDP and TCP - Modbus RTU Master/Slave TCP Client/Server - ASCII Terminal and Modem fonctionnalities - Terminal for ASC02/11/21/31 Unit - Compoway/F - Frame Sniffer (need two RS232C ports) - Frame Booster (RS232C/Ethernet UDP) - OPC Client Just helping you in Omron integration /yes.gif style=vertical-align:middle emoid= border=0 alt=yes.gif /> . http://support-omron.fr/MultiwayE.php
  4. OMRON CS1W-CFI31 USB TO RS232

    Hi, USB adaptor would not works in any case because it is powered by a 5v only (USB). RS232C specifications says +/- 12V. Often, you will connect with less than 2m or in clean environment (no invertor). On the field, I always bring my PCMCIA adpator which provide 2 RS232C ports (usefull) JP
  5. Input Interrupts in CP1L-M40CDR

    I had same phenomena than you. So I decide to power OFF then ON and now this is working fine. JPV
  6. NSJ and access via internet

    Exact WAN IP: 83.112.169.38 have a look to the attached drawing. To add your IP on my NSJ, I need also your LAN IP address of your PC to get its node n° (last field) Regards, JPV
  7. NSJ and access via internet

    Hi Pawel, I succed uploading PLC Program from a NSJ12 via Internet and ADSL modem. My local temporary WAN IP: 83.112.169 (ADSL modem) My Local fixed LAN IP: 10.62.241.50 The remote temporary WAN IP: 86.203.141.4 (my NSJ12) My remote NSJ12 LAN IP: 10.62.241.12 (sorry, I use the same domain on each LAN network) local settings port 9600 Net n°1 Node: 12 Subnet: 255.255.255.0 Gateway: 10.62.241.1 I should add (for a while) my local temporary WAN IP address corresponding to the node number of my PC 50 83 112 169 38 I can now connect CxP using following setup: NSJ G5D Ethernet Source Net: 0 Destin Net: 0 Node: 12 Frame: 512 Delai: 5s Driver Auto detection enabled (which shows my last IP 50) IP 86.203.141.4 I hope this will help you. JPV PS: If you read this today, I can add your own IP address in my NSJ12 Table then you can test