Jay Anthony

FCN_237P_GE.pdf Peripheral_Connector_Wiring.pdf

ExampleDDEWrite.zip

File Name: How to convert from NT20/600M(S) Direct V4 to NT20/600S Direct V5 (Con File Submitter: Jay Anthony File Submitted: 13 Jun 2005 File Category: Tech and Application Notes How to convert from NT20M(S) Direct V4 to NT20S Direct V5 (Conversion from NTSS to NT-Win).pdf Click here to download this file

From PM this afternoon: Please post your questions in the forum sothat all may help you.

Sounds like you did not include all the files on the card. The root of the CF card should look like below. OS9KBOOT file is the key. It is like an AUTOEXEC.BAT for the operating system   .

Bob, I haven't used it in a long time, but here is a start. FINS macro Set Time.txt

https://forums.mrplc.com/index.php?/files/file/950-fins-activex-ethernet-control/

Yes.  If the@ symbol is in front of a function (@SUB(31)), then it will only execute for one scan.

These are the errors that will turn the ERR indicator solid.  

Turn Pin 4 on  

CVSS manuals.zip

File Name: CVSS DOS Software for CV SFC PLCs File Submitter: Jay Anthony File Submitted: 4 Oct 2003 File Category: Demo Software DOS Software for CV500 CV1000 and CV2000 PLCs. It is the only software that supports SFC for these PLCs. Click here to download this file

Did you put the screen in Transmit mode?

Try this "Expands to widest rung."

Since CNTR is a reversible counter it is also a ring counter and 0 is a valid count point.  Have you considered INC and DEC as a substitute?

I think you are right about the serial port, Bob.  Serial A needs to be set for Bar Code Reader.

Show output instructions  horizontally cannot be changed while online.  Change offline.

Post your text of function block and we'll have a look at it. 

The double bar to the lefty indicates a differentiated or one shot contact.  If you look you will find in the program a DIFU instruction with the same address.

Do not format the card in anyway.  It uses a FAT12 format and comes when you buy the card. I suggest no larger than 256mb.

Projet_(final).cxt Project_(final).cxt

Set DIP Switch 5 to ON, Auto-detect CX-Programmer parameters at the RS-232C port.

Awesome, Garry.  Let him diligently read your resources and then maybe I'll jump in. 

Good call I/O Rack!  BTW, I hide stuff all the time by putting them off the screen.

Log In.zip