jdaniel

MrPLC Member
  • Content count

    11
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jdaniel

  • Rank
    Sparky
  • Birthday 07/14/84

Contact Methods

  • Website URL http://
  • ICQ 0

Profile Information

  • Country Portugal

Recent Profile Visitors

1372 profile views
  1. UPDATE CPU LIBRARY

    hi Friends how can i update my library software in step 7. i have a cpu 312 but in my library i only have cpu312c and i can´t comunicate with cpu. thanks
  2. s5-s7 conversion

    hi, could someone help , what to do for translate a s5 program to s7? i add the files to the topic, thanks for help. jdaniel s5_program.rar
  3. step 5 v7.12 do not run

    hello friends in my PG720 with windows 2000 profissional SP1, when i start step 5 , open the window of the ms-dos and then close, if i start the program many times ,the windows of ms-dos always open and then close. i do not make any alteration in pg hardware or software. why that happens.
  4. big problem

    good morning friends i´ve a big problem , i upload a program from A1scpu with gx developer 6 , after edit somes lines and download the program, the program do not work, after check the program i observe that , when i upload the program , for some motive i only stay with a part of the program, with 14 outputs when should be 62 outputs. why that happens? after that i find the person who did the original program and he give me the program and said to use a melsec medoc plus or IEC developer , because he don´t remenber wich software use to do the program. how can i know which program should use? i have the gx iec developer v4.00 when try to open this error is displayed: "unable to open the project database with the current version of gx iec dveloper (4.00.00) (the project has been created with the newer version 6.01.06.)" whith melsec medoc plus 2.40 when try to open this error is displayed : "The project has a newer version than your softcontrol 2.04.01. Use at least Softcontrol Version 4.00.00 to open this project." what should i do? this is mi first job with mitsubishi, normally i work with omron and siemens. thanks for help , sorry my english !!
  5. change tc in A1S

    thanks for the quik answer one mor question, wich is the highest number for TC , could be K30000?? tanks
  6. change tc in A1S

    please can someone help me ,give a brief example how change the value for timers in plc mitsubishi A1S , the value they have is K20 , how many seconds K20 means? thanks for help , sorry my english jdaniel portugal
  7. s5==>s7

    hello i never convert a step 5 program to step 7 that conversion run well??? its good ??? i´am try to find opinion tanks
  8. Sattcontrol

    GOODS I HAVE TO PLACE A SIEMMENS S7-300 IN COMMUNICATION WITH A SATT CONTROL VERSION "SATTCON15" BUT I DON´T NOW WICH IS THE COMMUNICATION TYPE. ANY ONE CAN HELP ??? IS THERE ANY INTERFACE? THANKS JORGE
  9. Vat Control

    GOODS I HAVE TO PLACE A SIEMMENS S7-300 IN COMMUNICATION WITH A SATT CONTROL VERSION "SATTCON15" BUT I DON´T NOW WICH IS THE COMMUNICATION TYPE. ANY ONE CAN HELP ??? IS THERE ANY INTERFACE? THANKS JORGE
  10. Problem

    Hi! Yes the PG/PC interface is the MPI.... It was alredy selected.... but the error message continue.... booty: Jorge Costa
  11. Problem

    Hi. Good It’s the first time that I use this forum… I have a problem with a Siemens PLC S7 300… When I try to download the program to the PLC with a MPI PC Adapter v 5.1 the program displays an error message “Download 33:16662 (Online: the connection to the target module cannot be established)” . If the option (PG/PC is only master on the bus) is off the message become “Download 33:16944 (Online: No other active partner can be found) “… So, I can’t download the program… If Anybody can help me I appreciate.. Thanks … booty: Jorge Costa