elenercom
MrPLC Member-
Content count
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by elenercom
-
HI everybody, I uploaded program from EEPROM-8 of Shilin AX2N-80MR and found out that several parts of program are in yellow color. Could you please tell me what's the matter? Why they are in yellow color like that? Thank you for your kind attention
-
Hello everybody, It's first time I have a project with FX3G. I tried to connect my PC ( running on Windows XP) to PLC via the USB port but it failed because the driver is not installed yet. My GX developer is of ver.8.84N ( it is working with FX3G normally via RS422 port). Can any one tell me how can I install USB driver ? I really need it because the RS422 port is connected to GOT. Thank you in advance.
-
Hi everybody, I'm in need of cable XBTZG9775 to connect Magelis touch panel with FX3G CPU (Mitsubishi). Could anybody please send me pinout of that cable. Thank you for reading.
-
Hi everybody, I want to back up screen data of Pro-face GP2300 touch panel, but I have no programming cable. Could anyone please send me pin-out of that cable so I can make it myself? Thank you for your help
-
Hi everybody, Please help me to solve this problem. I use FX3U-32MT and try to generate pulses ( with one of instructions PLSY, PLSV or DRVI,..) to rotate a servo motor. everything is OK when a program is without interruption. Problem is when the above mentioned instructions are inside of interrupt program, they can be executed only once after PLC is switched to RUN (I used high speed counter set interruption). Program check is OK. PLC has no error. Although output Y0 , instruction activation flag and output busy flag are OFF, the instruction can not be executed again. Your help is highly appreciated. Thank you for reading.
-
Problem of pulse output inside of interruption program
elenercom replied to elenercom's topic in Mitsubishi
M8348 is called positioning instruction activation flag of Y0 output. I was familiar with cautions in 8.2.1. I can handle output or timer inside interrupt program without any problem. Such a pity that there is no example on high speed output inside an interrupt routine. Thank you for your comment -
Problem of pulse output inside of interruption program
elenercom replied to elenercom's topic in Mitsubishi
Thank you for your reply. I use the high speed counter set instruction where the destination device is an interrupt pointer. Each time, after pulse output has stopped, I tried to reset flags concerned to output Y0. It still does not help. Actually I can do the same thing with servo set in speed mode to avoid that problem. Anyway I think it should be also OK in positioning mode. -
HI everybody. I have OMRON touch panel NT31-ST121B-V2. Can anyone please tell me, if I can connect it with Mitsubishi PLC FX2N and what I need or how to connect them. Thank you for reading
-
Hi everybody, I begin programming with Visual Basic 6.0 and found out OMRON ActiveControlX of OMRON in components of VB. I think with those activeX, one can build up an user interface to communicate with OMRON PLC ( read/write data memory, set/reset bit device) but I don't know how to do it. Could you please tell me if there is any instruction manual which describe these things? Thank you for your reading.
-
Thank you very much.
-
Thank you for your reply
-
Hello everybody, Our PLC CPM2A does not always switches to RUN mode when powering up. In such a case we have to turn it off and ON several times. Can any one tell us how to correct this trouble? Thank you for your attention.
-
Thank you. I'll try it tomorrow.
-
Normally there is no any device attached to peripheral port. Machine was in normal working condition for 1 year then trouble started to happen. I changed PLC settings to RUN mode at start up with CX-program, put PLC into Program mode and transferred settings only. Thank you for your support
-
Thank you for your answers. Our CPM2A is connected to a text panel at RS-232 port. I don't understand how the panel affects operation mode of PLC? I tried to set RUN mode at start-up in PLC settings. I was OK for only 2 days then trouble happen again. This kind of trouble started to happen last month. I will check DM6600 soon. Once again thank you.
-
Hi everybody, I need some information on the F1 series PLC of Mitsubishi. Does anyone have instruction manual of that obsolete series? Thank you for your help.
-
Hi everybody, I have RS232/RS485 converter of DELTA , which has R+ and R- terminals for RS485. I want to communicate my laptop with Mitsubishi Inverter FR-A500. The PU connector of inverter (RJ45) has 4 terminal SDA, RDA, SDB and RDB. My questions are: 1. Can I communicate with inverter with that conveter? 2. If it's possible, how should I connect ? Thank you for your reply.
-
Hi everybody, I have KOYO KOSTAC SR-20EX. It's not working now. When switching ON power, only LED POWER on the CPU module is lit. Other LED ( RUN, BAT, CPU) are unlit. DC output on the power supply module is only 23,62 V. Battery's voltage is 2,94V. Could you please tell me the problem of my PLC? What I need for programming this type of PLC ( which cable or adapter and which software?) Thank you in advance.
-
Hi everybody, I want to install output extension module FX2N-16EYT-ESS/UL ( world spec. with transistor output of source logic) for FX2N-64MT (Japanese spec. with sink logic output) but I'm not sure if they will work together. Please tell me if I can do such thing? Thank you.
-
Thank you for your reply. I'll buy extension block instead of a new CPU. One transistor output is blown out but there is no spare output. Once again thank you
-
Thank you for your reply, PdL
-
Hi everybody, Please help me! I'm not sure if the programming port of Vigor VB2 PLC is RS-232 port with USB type connector? Thank you.
-
Thank you, Rodney I've found informations I needed.
-
Hi everybody, We have Vigor PLC of compact type in a new machine installed, but I have no any manuals. Could you please tell me where I can get some manuals. Thank you for your help